Difference between revisions of "Chelsio:Installation and Testing"
Jump to navigation
Jump to search
(Created page with "== Drivers Download == Down load the Uwire software from: http://service.chelsio.com/ == Installation == Unpack the tar files and run install.py. Follow the instructions...") |
(No difference)
|
Revision as of 15:52, 8 January 2015
Drivers Download
Down load the Uwire software from:
Installation
Unpack the tar files and run install.py.
Follow the instructions to install the required software (1,1 install all Drivers)
It is important to check the install log. A successful install by the python script does not always mean that - something may have fialed to install.
Check the log for any errors - it will tell you what the problem is. Install any needed packages and re install the Uwire software.
Loading the Driver
Loading in NIC mode (without offload support)
[root@hft1 ~]# modprobe cxgb4Loading in TOE mode (with offload support)
[root@hft1 ~]# modprobe t4_tomDependencies
No dependencies found.
Performance Tunning
The performance tunning could be established by t4_perftune.sh script which will configure Receiver Side Scaling(RSS) and enable Interrupt Coalescing.
[root@hft1 ~]# t4_perftune.sh