View source for Chelsio:Installation and Testing

== Drivers Download ==

Down load the Uwire software from:

http://service.chelsio.com/


== Installation ==

Unpack the tar files and run <syntaxhighlight>install.py.</syntaxhighlight>

Follow the instructions to install the required software (1,1 install all Drivers)

It is important to check the install log. A successful install by the python script does not always mean that - something may have fialed to install.  

Check the log for any errors - it will tell you what the problem is.  Install any needed packages and re install the Uwire software.

== Loading the Driver ==

Loading in NIC mode (without offload support)
<syntaxhighlight>
[root@hft1 ~]# modprobe cxgb4
</syntaxhighlight>

Loading in TOE mode (with offload support)
<syntaxhighlight>
[root@hft1 ~]# modprobe t4_tom
</syntaxhighlight>

== Dependencies ==

No dependencies found.

== Performance Tunning ==

The performance tunning could be established by '''t4_perftune.sh''' script which will configure Receiver Side Scaling(RSS) and enable Interrupt Coalescing. 
<syntaxhighlight>
[root@hft1 ~]# t4_perftune.sh 
</syntaxhighlight>