View source for RHSS: On-Premise system reqs

== Network Requirements ==

Most deployments will work well enough with 1 Gigabit Ethernet as the throughout will scale as the number of servers increases.

As of RHSS 2.0 1 Gigabit Ethernet and 10Gigabit Ethernet are supported.  Infiniband is in testing and it is recommended that 10 Gbe is used.



== Storage Servers ==

The requirements for RHSS go beyond those of a basic GlusterFS system.  The specs below are not the only working config, but this is a basic configuration comparison.

{| class="wikitable" cellpadding=5 style="border:1px; width:50%;"
|-
!  !! GlusterFS 3.3 !! RHSS 2.0 
|-
| Architecture  || Intel/AMD x86 64-bit processor || Intel/AMD x86 64-bit processor
|-
| Memory || 1GB Minimum || 16GB
|-
| System Disk || 1 Disk || 12 Disks RAID6
|-
| Netowork || Gigabit or 10Gbe Ethernet Infiniband (OFED 1.5 or later) || Gigabit or 10Gbe Ethernet
|-
| OS || Red Hat Enterprise Linux 6.2+ || Red Hat Enterprise Linux 6.2 EUS
|-
| Installation || ISO,DVD ||  Satellite Server, ISO or DVD
|-
| Sub-System FS || XFS || Red Hat Scalable File System (XFS)
|}


== Data Container ==

The List of supported hardware can be found online:

https://access.redhat.com/site/articles/66206#HP_High_Performance_Configuration


The system must be set up with two Volumes:

* At least 2 disks totalling no less than 200GB, RAID 1:  For the OS
* At least 12 Disks, RAID6, XFS / LVMs:  For the Data