Shanal: Created page with "== Setup up proxies in HA == * Hedvig recommends setup of proxy in high availability as this could be single point of failure. * In order to create proxy pair , Deploy '''cvm...."

2016-07-27T18:26:27Z

Created page with "== Setup up proxies in HA == * Hedvig recommends setup of proxy in high availability as this could be single point of failure. * In order to create proxy pair , Deploy '''cvm...."

New page

== Setup up proxies in HA ==
* Hedvig recommends setup of proxy in high availability as this could be single point of failure.
* In order to create proxy pair , Deploy '''cvm.ova''' two times in ESXI.
* On barebone machine make sure both resides on different physical nodes.
* Make sure one interface interface is connected to private network (eth1) and another to public network to provide access of nfs/iSCSI.
* set hostname and update /etc/host file of both VMs,
* During cluster install , change tgt nodes file as follows.

<nowiki>

# Enter list of iscsi/nfs nodes below
# ----
# sample config(standalone): host1
# host2
#
# sample config(HA): host1,host2,vip=192.168.108.30,privatenet=172.22.22.0
# host3,host4,vip=192.168.108.31,privatenet=172.22.22.0
#
# sample config(HA): host1,host2,vipname=host-vip,privatenet=172.22.22.0
# host3,host4,vipname=host2-vip,privatenet=172.22.22.0
#
# supported attributes - for HA:
# vip = virtual ip to be used with HA
# vipname = virtual hostname to be used with HA
# privatenet = private network to be used with HA
# ssh_port = port for mgmt to communicate with targets
# ----
# primary,secondary,vip=<vip>,privatenet=<privatenet>
# ----

proxy1,proxy2,vip=172.22.28.243,privatenet=172.22.22.0
</nowiki>

Hedvig: High Availability Proxies configurations - Revision history

Shanal: Created page with "== Setup up proxies in HA == * Hedvig recommends setup of proxy in high availability as this could be single point of failure. * In order to create proxy pair , Deploy '''cvm...."