LSI: LSI StorCli Cheatsheet - Revision history

Antony: /* rescan disk and extend LVM */

2023-11-16T10:23:57Z

rescan disk and extend LVM

Antony: /* Extend a RAID6 array (TT) */

2023-11-16T10:15:43Z

Extend a RAID6 array (TT)

Antony: add how to get the info for the drive expansion

2023-10-31T14:41:44Z

add how to get the info for the drive expansion

David at 12:59, 31 October 2023

2023-10-31T12:59:07Z

Antony: add howto reset status from UBad to UGood

2022-08-08T11:00:31Z

add howto reset status from UBad to UGood

David at 13:12, 3 November 2016

2016-11-03T13:12:04Z

David: Created page with "== Install Process == * Search for 'StorCli' here: http://www.avagotech.com/support/download-search unzip 1.19.04_StorCLI.zip cd storcli_all_os/ cd Linux rpm -..."

2016-07-26T10:15:56Z

Created page with "== Install Process == * Search for 'StorCli' here: http://www.avagotech.com/support/download-search <syntaxhighlight> unzip 1.19.04_StorCLI.zip cd storcli_all_os/ cd Linux rpm -..."

New page

== Install Process ==
* Search for 'StorCli' here: http://www.avagotech.com/support/download-search
<syntaxhighlight>
unzip 1.19.04_StorCLI.zip
cd storcli_all_os/
cd Linux
rpm -ivh ./storcli-1.19.04-1.noarch.rpm
rpm -qpl storcli-1.19.04-1.noarch.rpm

# Files are in /opt/MegaRAID/storcli/
# add this to you $PATH
</syntaxhighlight>

== Query ==
* Get everything
<syntaxhighlight>
storcli64 /c0 show all
# and for a list of options; storcli64 /c0 show help
</syntaxhighlight>

== Configuring ==

@@ Line 251: / Line 251: @@
 </pre>
 ok
 what about the physical volume (spoiler it'll be the old value we then need to resize it with <code>pvresize /dev/<blockdev></code>). Don't worry for an extend if you pick the wrong drive nothing will happen. lets show all the output from check to resize.
 <pre>
@@ Line 264: / Line 263: @@
    LV      VG  Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
    archive vg0 -wi-ao---- <29.11t
 [root@storage1 ~]# pvresize /dev/sdc
    Physical volume "/dev/sdc" changed
@@ Line 272: / Line 270: @@
    /dev/sdc   vg0 lvm2 a--  43.66t 14.55t
 </pre>
 OK, now recheck <code>vgs</code> and <code>lvs</code> and then extend the logical volume (in this case <code>lvextend -l +100%Free /dev/mapper/vg0-archive</code)
 <pre>
@@ Line 289: / Line 286: @@
 └─vg0-archive 253:0    0 43.7T  0 lvm  /tt-archive
 </pre>
 Great all the block level manipulation is done what about the filesystem? another spoiler. . . it's still ~30TB, we need to resize the fs with <code>xfs_growfs /dev/mapper/vg0-archive</code> as this is xfs
 <pre>
@@ Line 301: / Line 297: @@
 /dev/mapper/vg0-archive   44T   27T   17T  62% /tt-archive
 </pre>
 note than on this system I ran the growfs commmand in screen as I was worried it might take a while. For my future self it was instant

← Older revision		Revision as of 10:15, 16 November 2023
Line 132:		Line 132:

	</pre>		</pre>
		+	=== rescan disk and extend LVM ===
		+	we waited a while and it's done but not we need to work our way up the levels resizing everything from the block dev in linux (assuming you can't reboot), then resize the LVM Physical volume (PV). Updating the PV SHOULD update the volume group data automatically and then we need to extend the LVM volume and finally the Filesystem on top.
		+
		+	first up check job complete
		+	<pre>
		+	[root@asgard ~]# ssh storage1
		+	Last login: Tue Oct 31 16:54:37 2023 from tt-node01.localdomain
		+	[root@storage1 ~]# /opt/MegaRAID/storcli/storcli64 /c0/v239 show migrate
		+	CLI Version = 007.1705.0000.0000 Mar 31, 2021
		+	Operating system = Linux 3.10.0-1127.el7.x86_64
		+	Controller = 0
		+	Status = Success
		+	Description = None
		+
		+
		+	VD Operation Status :
		+	===================
		+
		+	------------------------------------------------------------
		+	VD Operation Progress% Status Estimated Time Left
		+	------------------------------------------------------------
		+	239 Migrate - Not in progress -
		+	------------------------------------------------------------
		+	</pre>
		+
		+	then check the size
		+	<pre>
		+	[root@storage1 ~]# /opt/MegaRAID/storcli/storcli64 /c0/v239 show all
		+	CLI Version = 007.1705.0000.0000 Mar 31, 2021
		+	Operating system = Linux 3.10.0-1127.el7.x86_64
		+	Controller = 0
		+	Status = Success
		+	Description = None
		+
		+
		+	/c0/v239 :
		+	========
		+
		+	--------------------------------------------------------------
		+	DG/VD TYPE State Access Consist Cache Cac sCC Size Name
		+	--------------------------------------------------------------
		+	0/239 RAID6 Optl RW Yes RWBD - ON 43.661 TB
		+	--------------------------------------------------------------
		+
		+	VD=Virtual Drive\| DG=Drive Group\|Rec=Recovery
		+	Cac=CacheCade\|OfLn=OffLine\|Pdgd=Partially Degraded\|Dgrd=Degraded
		+	Optl=Optimal\|dflt=Default\|RO=Read Only\|RW=Read Write\|HD=Hidden\|TRANS=TransportReady
		+	B=Blocked\|Consist=Consistent\|R=Read Ahead Always\|NR=No Read Ahead\|WB=WriteBack
		+	AWB=Always WriteBack\|WT=WriteThrough\|C=Cached IO\|D=Direct IO\|sCC=Scheduled
		+	Check Consistency
		+
		+
		+	PDs for VD 239 :
		+	==============
		+
		+	----------------------------------------------------------------------------
		+	EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp Type
		+	----------------------------------------------------------------------------
		+	252:2 2 Onln 0 7.276 TB SAS HDD N N 512B HUS728T8TAL5204 U -
		+	252:3 3 Onln 0 7.276 TB SAS HDD N N 512B HUS728T8TAL5204 U -
		+	252:4 4 Onln 0 7.276 TB SAS HDD N N 512B HUS728T8TAL5204 U -
		+	252:5 5 Onln 0 7.276 TB SAS HDD N N 512B HUS728T8TAL5204 U -
		+	252:6 0 Onln 0 7.276 TB SAS HDD N N 512B HUS728T8TAL5204 U -
		+	252:7 1 Onln 0 7.276 TB SAS HDD N N 512B HUS728T8TAL5204 U -
		+	252:0 9 Onln 0 7.276 TB SAS HDD N N 512B HUS728T8TAL5204 U -
		+	252:1 8 Onln 0 7.276 TB SAS HDD N N 512B HUS728T8TAL5204 U -
		+	----------------------------------------------------------------------------
		+
		+	EID=Enclosure Device ID\|Slt=Slot No\|DID=Device ID\|DG=DriveGroup
		+	DHS=Dedicated Hot Spare\|UGood=Unconfigured Good\|GHS=Global Hotspare
		+	UBad=Unconfigured Bad\|Sntze=Sanitize\|Onln=Online\|Offln=Offline\|Intf=Interface
		+	Med=Media Type\|SED=Self Encryptive Drive\|PI=Protection Info
		+	SeSz=Sector Size\|Sp=Spun\|U=Up\|D=Down\|T=Transition\|F=Foreign
		+	UGUnsp=UGood Unsupported\|UGShld=UGood shielded\|HSPShld=Hotspare shielded
		+	CFShld=Configured shielded\|Cpybck=CopyBack\|CBShld=Copyback Shielded
		+	UBUnsp=UBad Unsupported\|Rbld=Rebuild
		+
		+
		+	VD239 Properties :
		+	================
		+	Strip Size = 256 KB
		+	Number of Blocks = 93761961984
		+	VD has Emulated PD = Yes
		+	Span Depth = 1
		+	Number of Drives Per Span = 8
		+	Write Cache(initial setting) = WriteBack
		+	Disk Cache Policy = Disk's Default
		+	Encryption = None
		+	Data Protection = None
		+	Active Operations = None
		+	Exposed to OS = Yes
		+	OS Drive Name = /dev/sdc
		+	Creation Date = 04-08-2022
		+	Creation Time = 03:31:37 PM
		+	Emulation type = default
		+	Cachebypass size = Cachebypass-64k
		+	Cachebypass Mode = Cachebypass Intelligent
		+	Is LD Ready for OS Requests = Yes
		+	SCSI NAA Id = 600304802545e3f02a7ea2d92c4cba60
		+	Unmap Enabled = No
		+
		+	</pre>
		+	Great it's now 43.661 TB. what about in the os?
		+	<pre>
		+	[root@storage1 ~]# lsblk /dev/sdc
		+	NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
		+	sdc 8:32 0 29.1T 0 disk
		+	└─vg0-archive 253:0 0 29.1T 0 lvm /tt-archive
		+	</pre>
		+
		+	lets fix that by rescanning just that
		+	<pre>
		+	[root@storage1 ~]# echo 1 >/sys/class/block/sdc/device/rescan
		+	[root@storage1 ~]# lsblk /dev/sdc
		+	NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
		+	sdc 8:32 0 43.7T 0 disk
		+	└─vg0-archive 253:0 0 29.1T 0 lvm /tt-archive
		+	</pre>
		+	ok
		+
		+	what about the physical volume (spoiler it'll be the old value we then need to resize it with <code>pvresize /dev/<blockdev></code>). Don't worry for an extend if you pick the wrong drive nothing will happen. lets show all the output from check to resize.
		+	<pre>
		+	[root@storage1 ~]# pvs
		+	PV VG Fmt Attr PSize PFree
		+	/dev/sdc vg0 lvm2 a-- <29.11t 0
		+	# we don't neeed these but it's useful to refer back to later
		+	[root@storage1 ~]# vgs
		+	VG #PV #LV #SN Attr VSize VFree
		+	vg0 1 1 0 wz--n- <29.11t 0
		+	[root@storage1 ~]# lvs
		+	LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
		+	archive vg0 -wi-ao---- <29.11t
		+
		+	[root@storage1 ~]# pvresize /dev/sdc
		+	Physical volume "/dev/sdc" changed
		+	1 physical volume(s) resized or updated / 0 physical volume(s) not resized
		+	[root@storage1 ~]# pvs
		+	PV VG Fmt Attr PSize PFree
		+	/dev/sdc vg0 lvm2 a-- 43.66t 14.55t
		+	</pre>
		+
		+	OK, now recheck <code>vgs</code> and <code>lvs</code> and then extend the logical volume (in this case <code>lvextend -l +100%Free /dev/mapper/vg0-archive</code)
		+	<pre>
		+	[root@storage1 ~]# vgs
		+	VG #PV #LV #SN Attr VSize VFree
		+	vg0 1 1 0 wz--n- 43.66t 14.55t
		+	[root@storage1 ~]# lvs
		+	LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
		+	archive vg0 -wi-ao---- <29.11t
		+	[root@storage1 ~]# lvextend -l +100%Free /dev/mapper/vg0-archive
		+	Size of logical volume vg0/archive changed from <29.11 TiB (238448 extents) to 43.66 TiB (357673 extents).
		+	Logical volume vg0/archive successfully resized.
		+	[root@storage1 ~]# lsblk /dev/sdc
		+	NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
		+	sdc 8:32 0 43.7T 0 disk
		+	└─vg0-archive 253:0 0 43.7T 0 lvm /tt-archive
		+	</pre>
		+
		+	Great all the block level manipulation is done what about the filesystem? another spoiler. . . it's still ~30TB, we need to resize the fs with <code>xfs_growfs /dev/mapper/vg0-archive</code> as this is xfs
		+	<pre>
		+	[root@storage1 ~]# df -h /tt-archive
		+	Filesystem Size Used Avail Use% Mounted on
		+	/dev/mapper/vg0-archive 30T 27T 2.3T 93% /tt-archive
		+	[root@storage1 ~]# blkid /dev/mapper/vg0-archive
		+	/dev/mapper/vg0-archive: UUID="73ce74c0-2e48-4eeb-a0ea-f566fedd6451" TYPE="xfs"
		+	[root@storage1 ~]# df -h /tt-archive
		+	Filesystem Size Used Avail Use% Mounted on
		+	/dev/mapper/vg0-archive 44T 27T 17T 62% /tt-archive
		+	</pre>
		+
		+	note than on this system I ran the growfs commmand in screen as I was worried it might take a while. For my future self it was instant

@@ Line 33: / Line 33: @@
 == Extend a RAID6 array (TT) ==
 <pre>
 [root@storage1 ~]# /opt/MegaRAID/storcli/storcli64 /c0/v239 start migrate type=r6 option=add drives=252:0-1
@@ Line 40: / Line 109: @@
 Status = Success
 Description = Start VD Operation Success
 </pre>

← Older revision		Revision as of 12:59, 31 October 2023
Line 31:		Line 31:
	Description = Add VD Succeeded		Description = Add VD Succeeded
	</syntaxhighlight>		</syntaxhighlight>
		+
		+	== Extend a RAID6 array (TT) ==
		+	<pre>
		+	[root@storage1 ~]# /opt/MegaRAID/storcli/storcli64 /c0/v239 start migrate type=r6 option=add drives=252:0-1
		+	CLI Version = 007.1705.0000.0000 Mar 31, 2021
		+	Operating system = Linux 3.10.0-1127.el7.x86_64
		+	Controller = 0
		+	Status = Success
		+	Description = Start VD Operation Success
		+	</pre>

← Older revision		Revision as of 13:12, 3 November 2016
Line 20:		Line 20:

	== Configuring ==		== Configuring ==
		+	* Example for setting up a RAID60 (on 36 Drives, 18 Drives per array)
		+	<syntaxhighlight>
		+	[root@oswald ~]# storcli64 /c0 add vd type=raid60 drives=85:0-23,88:0-11 pdperarray=18
		+	Controller = 0
		+	Status = Success
		+	Description = Add VD Succeeded
		+	</syntaxhighlight>

@@ Line 19: / Line 19: @@
 </syntaxhighlight>
 == Configuring ==
 * Example for setting up a RAID60 (on 36 Drives, 18 Drives per array)