TerraNova: Update EnergyCard & Baseboard FRU - Revision history

Jon: /* Error Message */

2013-06-27T11:49:16Z

Error Message

2013-06-27T11:48:57Z

Error Message

2013-06-27T11:48:39Z

Prerequisites

2013-06-27T11:23:13Z

Update Slot FRUs

2013-06-27T11:16:17Z

Update Slot FRUs

2013-06-27T11:09:52Z

2013-06-27T10:54:38Z

2013-06-27T10:49:13Z

Update X04 Card FRU

2013-06-27T10:44:14Z

2013-06-27T10:41:03Z

@@ Line 15: / Line 15: @@
 * All SOCs need to be running firmware package 2.2.10 or higher
 === Error Message ===
-* Expect to see 'Unknown FRU header' - This is because we are piggybacking on the existing fru file transfer mechanism to transfer the EEPROM images.  Ipmitool expects the data to be in the ipmi fru format, and complains when it is not, but continues the transfer anyway.
+* Expect to see ''''Unknown FRU header'''' - This is because we are piggybacking on the existing fru file transfer mechanism to transfer the EEPROM images.  Ipmitool expects the data to be in the ipmi fru format, and complains when it is not, but continues the transfer anyway.
 == Update Process ==

@@ Line 15: / Line 15: @@
 * All SOCs need to be running firmware package 2.2.10 or higher
 === Error Message ===
-* Expect to see 'Unknown FRU header'
+* Expect to see 'Unknown FRU header' - This is because we are piggybacking on the existing fru file transfer mechanism to transfer the EEPROM images.  Ipmitool expects the data to be in the ipmi fru format, and complains when it is not, but continues the transfer anyway.
 == Update Process ==

@@ Line 14: / Line 14: @@
 === Firmware ===
 * All SOCs need to be running firmware package 2.2.10 or higher
 == Update Process ==

← Older revision		Revision as of 11:23, 27 June 2013
Line 160:		Line 160:
	Unknown FRU header version 0x63		Unknown FRU header version 0x63
	</syntaxhighlight>		</syntaxhighlight>
		+	* Power system off again and remove X04 EnergyCard from slot 2 and reinstall in slot 6.
		+	* Power system back on.

@@ Line 118: / Line 118: @@
 <syntaxhighlight>
 Jon@ubuntu1204-cobbler:~/tn_fru$ ipmitool -U admin -P admin -H nova24-ipmi fru write 82 tn_web.slot6.img
 Fru Size			 : 8192 bytes
 Size to Write	 : 8192 bytes
   Unknown FRU header version 0x63
 </syntaxhighlight>

← Older revision		Revision as of 10:54, 27 June 2013
Line 62:		Line 62:
	</syntaxhighlight>		</syntaxhighlight>
	* Repeat for all remaining X04 EnergyCards		* Repeat for all remaining X04 EnergyCards
		+
		+	=== Update Dual Uplink Card FRU ===
		+	* Update FRU on SOC0 of the dual uplink EnergyCard (Node 0 in this example)
		+	<syntaxhighlight>
		+	Jon@ubuntu1204-cobbler:~/tn_fru$ ipmitool -U admin -P admin -H nova0-ipmi fru write 81 dual_uplink_node_0.img
		+	Fru Size : 8192 bytes
		+	Size to Write : 8192 bytes
		+	Unknown FRU header version 0x63
		+	</syntaxhighlight>
		+	* The update FRU on SOC1 of the dual uplink EnergyCard (Node 1 in this example)
		+	<syntaxhighlight>
		+	Jon@ubuntu1204-cobbler:~/tn_fru$ ipmitool -U admin -P admin -H nova1-ipmi fru write 81 dual_uplink_node_1.img
		+	Fru Size : 8192 bytes
		+	Size to Write : 8192 bytes
		+	Unknown FRU header version 0x63
		+	</syntaxhighlight>

← Older revision		Revision as of 10:49, 27 June 2013
Line 54:		Line 54:
	Node 27: 172.28.129.27		Node 27: 172.28.129.27
	</syntaxhighlight>		</syntaxhighlight>
		+	* Update FRU on SOC0 of first X04 EnergyCard (Node 4 in this example)
		+	<syntaxhighlight>
		+	Jon@ubuntu1204-cobbler:~/tn_fru$ ipmitool -U admin -P admin -H nova4-ipmi fru write 81 x04.img
		+	Fru Size : 8192 bytes
		+	Size to Write : 8192 bytes
		+	Unknown FRU header version 0x63
		+	</syntaxhighlight>
		+	* Repeat for all remaining X04 EnergyCards

← Older revision		Revision as of 10:44, 27 June 2013
Line 24:		Line 24:

	=== Update X04 Card FRU ===		=== Update X04 Card FRU ===
		+	* Identify SOC0 for every X04 EnergyCard.
		+	<syntaxhighlight>
		+	Jon@ubuntu1204-cobbler:~$ cxmanage ipinfo nova0-ipmi
		+	Getting IP addresses...
		+	1 successes \| 0 errors \| 0 nodes left \| .
		+
		+	IP info from nova0-ipmi
		+	Node 0: 172.28.129.0
		+	Node 1: 172.28.129.1
		+	Node 4: 172.28.129.4 <-- Slot 1, SOC0
		+	Node 5: 172.28.129.5
		+	Node 6: 172.28.129.6
		+	Node 7: 172.28.129.7
		+	Node 12: 172.28.129.12 <-- Slot 3, SOC0
		+	Node 13: 172.28.129.13
		+	Node 14: 172.28.129.14
		+	Node 15: 172.28.129.15
		+	Node 16: 172.28.129.16 <--Slot 4, SOC0
		+	Node 17: 172.28.129.17
		+	Node 18: 172.28.129.18
		+	Node 19: 172.28.129.19
		+	Node 20: 172.28.129.20 <-- Slot 5, SOC0
		+	Node 21: 172.28.129.21
		+	Node 22: 172.28.129.22
		+	Node 23: 172.28.129.23
		+	Node 24: 172.28.129.24 <-- Slot 6, SOC0
		+	Node 25: 172.28.129.25
		+	Node 26: 172.28.129.26
		+	Node 27: 172.28.129.27
		+	</syntaxhighlight>

← Older revision		Revision as of 10:41, 27 June 2013
Line 7:		Line 7:
	** One FRU per SystemBoard slot. Can only be programmed when a card is plugged into it – can use any node on that card but I have only tested with the first node on each card.		** One FRU per SystemBoard slot. Can only be programmed when a card is plugged into it – can use any node on that card but I have only tested with the first node on each card.
	** '''NOTE''' – there is a different image for '''EVERY''' slot!		** '''NOTE''' – there is a different image for '''EVERY''' slot!
		+
		+	== Prerequisites ==
		+	=== Hardware ===
		+	* At least one TerraNova uplink card is required
		+	* At least three X04 EnergyCards are required
		+	=== Firmware ===
		+	* All SOCs need to be running firmware package 2.2.10 or higher
		+
		+	== Update Process ==
		+	=== Update FW ===
		+	* Refer to the firmware update guidelines on this wiki but the basic command is:
		+	<syntaxhighlight>
		+	Jon@ubuntu1204-cobbler:~$ cxmanage -a fwupdate package ECX-1000_update-production-v2.2.10.tar.gz nova0-ipmi
		+	</syntaxhighlight>
		+	* Power cycle the system and repeat above command to ensure both primary and backup FW images have been programmed.
		+
		+	=== Update X04 Card FRU ===