Difference between revisions of "Bright:CaaS"

From Define Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 130: Line 130:
 
[root@shadow-head ~] systemctl restart shorewall
 
[root@shadow-head ~] systemctl restart shorewall
 
</syntaxhighlight>
 
</syntaxhighlight>
 +
 +
The new dnsmasq configuration is now copied into the openstack software image and also onto the network node.
 +
<syntaxhighlight>
 +
[root@shadow-head ~] cp /cm/shared/apps/cm-openstack-caas/etc/dnsmasq.dev.conf /cm/images/openstack-image/etc/neutron
 +
[root@shadow-head ~] scp /cm/shared/apps/cm-openstack-caas/etc/dnsmasq.dev.conf <NETWORK NODE IP>:/etc/neutron
 +
</syntaxhighlight>
 +
 +
A symlink for the images is created:
 +
<syntaxhighlight>
 +
[root@shadow-head ~] ln -s /tftpboot/buildmatic /var/www/html/buildmatic/images
 +
</syntaxhighlight>
 +
 +
To use cm-openstack-caas, an OpenStack cluster and a cluster user must be added next.
 +
Before adding a user, the synchronization of the LDAP users to OpenStack must be enabled.
 +
 +
<syntaxhighlight>
 +
[root@shadow-head ~] cmsh -c ‘openstack; use default; settingsusers; set automaticallysyncldapuserstokeystone yes; set writeopenstackrcfilesforusers yes; commit’
 +
</syntaxhighlight>
 +
 +
The last step for the CaaS installation is to set the MTU of the internal and the vxlan networks to 9000:
 +
<syntaxhighlight>
 +
[root@shadow-head ~]# cmsh
 +
[shadow-head]% network
 +
[shadow-head->network]% use internalnet                                                                 
 +
[shadow-head->network[internalnet]]% set MTU 9000
 +
[shadow-head->network[internalnet*]]% commit
 +
[shadow-head->network[internalnet]]% show
 +
Parameter                        Value                                       
 +
-------------------------------- ----------------------------------------------
 +
Allow autosign                  Automatic                                     
 +
OpenStack network type          None                                         
 +
Revision                                                                       
 +
Write DNS zone                  BOTH                                         
 +
Base address                    10.141.0.0                                   
 +
Broadcast address                10.141.255.255                               
 +
Domain Name                      eth.cluster                                   
 +
Dynamic range start              10.141.160.0                                 
 +
Dynamic range end                10.141.167.255                               
 +
Gateway                          0.0.0.0                                       
 +
IPv6                            no                                           
 +
Lock down dhcpd                  no                                           
 +
MTU                              9000                                         
 +
Management allowed              yes                                           
 +
Netmask bits                    16                                           
 +
Node booting                    yes                                           
 +
Notes                            <0 bytes>                                     
 +
Type                            Internal                                     
 +
name                            internalnet                                   
 +
EC2AvailabilityZone                                                           
 +
EC2SubnetID                                                                   
 +
Private Cloud 
 +
 +
[shadow-head->network[internalnet]]% ..
 +
[shadow-head->network]% use vxlanhostnet                                                           
 +
[shadow-head->network[vxlanhostnet]]% set mtu 9000
 +
[shadow-head->network[vxlanhostnet*]]% commit
 +
[shadow-head->network[vxlanhostnet]]% show
 +
Parameter                        Value                                       
 +
--------------------------------- ---------------------------------------------
 +
Allow autosign                    Automatic                                   
 +
OpenStack Host network                                                         
 +
OpenStack Physical network name  phyvxlanhostnet                             
 +
OpenStack VLAN ID                0                                           
 +
OpenStack VLAN Range              1:50000                                     
 +
OpenStack alloc pool end          0.0.0.0                                     
 +
OpenStack alloc pool start        0.0.0.0                                     
 +
OpenStack network is shared      no                                           
 +
OpenStack network type            VXLAN Host                                   
 +
Revision                                                                       
 +
Write DNS zone                    BOTH                                         
 +
Base address                      10.161.0.0                                   
 +
Broadcast address                10.161.255.255                               
 +
Domain Name                      cm.openstack-vxlanhost                       
 +
Dynamic range start              0.0.0.0                                     
 +
Dynamic range end                0.0.0.0                                     
 +
Gateway                          0.0.0.0                                     
 +
IPv6                              no                                           
 +
Lock down dhcpd                  no                                           
 +
MTU                              9000                                         
 +
Management allowed                no                                           
 +
Netmask bits                      16                                           
 +
Node booting                      no                                           
 +
Notes                            <0 bytes>                                   
 +
Type                              Internal                                     
 +
name                              vxlanhostnet                                 
 +
EC2AvailabilityZone                                                           
 +
EC2SubnetID                                                                   
 +
Private Cloud
 +
</syntaxhighlight>
 +
 +
Make sure you have the jumbo frame (MTU 9000) enabled on the switch as well.

Latest revision as of 16:13, 24 November 2015

Make sure, you've followed the Openstack installation guide and you have a working Openstack environment on your Bright cluster. (http://wiki.bostonlabs.co.uk/w/index.php?title=Bright:Openstack-install)

Installing CaaS

[root@shadow-head ~] yum install -y cm-openstack-caas cm-ipxe-caas
[root@shadow-head ~] yum update -y

Next, in the file /cm/shared/apps/cm-openstack-caas/bin/Settings.py, the values of “external_dns_server” and “buildmatic_host_ip” should be edited appropriately: 

'external_dns_server': '172.28.0.2'
'buildmatic_host_ip': '172.28.0.199' # this is the external ip of the head node
'pxe_helper_url': 'http://localhost:8082/chain'

After the modifications are in place, the pxehelper service is started and enabled: 

[root@shadow-head ~] systemctl start pxehelper
[root@shadow-head ~] systemctl enable pxehelper

The pxehelper service uses port 8082. Unblock this port by adding the following rule to /etc/shorewall/rules and then restarting shorewall: 

# -- Allow pxehelper service for automatic head node installation
ACCEPT   net            fw              tcp     8082
 
[root@shadow-head ~] systemctl restart shorewall

The OpenStack images can now be created: 

[root@shadow-head ~] openstack image create --file /cm/local/apps/ipxe/ipxe-plain-net0.img --disk-format=raw --container-format=bare --public iPXE-plain-eth0
[root@shadow-head ~] openstack image create --file /cm/local/apps/ipxe/ipxe-plain-net1.img --disk-format=raw --container-format=bare --public iPXE-plain-eth1
[root@shadow-head ~] openstack image create --file /cm/local/apps/ipxe/ipxe-caas.img --disk-format=raw --container-format=bare --public ipxe-caas

The dnsmasq utility must now be configured. Its configuration file: /cm/shared/apps/cm-openstack-caas/etc/dnsmasq.dev.conf has two strings that need to be changed: 

# The string is replaced with the external IP address of the head node(s).
<INSERT EXTERNAL IP OF THE MACHINE RUNNING PXE HELPER HERE>
 ...
# This is replaced with the FQDN of the head node (In case of HA setup with the FQDN assigned to the VIP) and with the IP address.
<INSERT EXTERNAL FQDN OF BUILDMATIC SERVER HERE>,<INSERT EXTERNAL IP OF BUILDMATIC SERVER HERE>

After editing:

  • If the network node is not used as a compute node, then the following commands are run:
[root@shadow-head ~] cmsh -c ‘category use openstack-network-nodes; roles; use openstack::node; customizations; add pxe;
set filepaths /etc/neutron/dhcp_agent.ini; entries; add dnsmasq_config_file=/etc/neutron/dnsmasq.dev.conf; commit’
  • If the network node is also to be used as a compute node, then the following cmsh command is run. In this command, the network node is put in the “openstack-compute-hosts” category, is assigned “openstack::node” role, and the customizations needed are added:
[root@shadow-head ~] cmsh -c ‘device use <NETWORK_NODE>; roles; assign openstack::node; customizations; add pxe;
set filepaths /etc/neutron/dhcp_agent.ini; entries; add dnsmasq_config_file=/etc/neutron/dnsmasq.dev.conf; commit’

The following (key, value) pairs are added in the security group section of the configuration file: 

[root@shadow-head ~] cmsh -c ‘category use openstack-compute-hosts; roles; use openstack::node; customizations; add "no sec groups";
set filepaths /etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini; entries; add securitygroup firewall_driver=neutron.agent.firewall.NoopFirewallDriver; add securitygroup enable_security_group=False; commit’

If Ceph is installed then it is usually a good idea to customize it by settings its cache mode to writeback: 

[root@shadow-head ~] cmsh -c ‘category use openstack-compute-hosts; roles; use openstack::node; customizations; add "rbd cache";
set filepaths /etc/nova/nova.conf; entries; add libvirt disk_cachemodes=network=writeback,block=writeback; commit’

Buildmatic is now installed and configured. 

[root@shadow-head ~] yum -y install buildmatic-common buildmatic-7.1-stable createrepo
  
[root@shadow-head ~] /cm/local/apps/buildmatic/common/bin/setupbmatic --createconfig
[root@shadow-head ~] cp /cm/local/apps/buildmatic/common/settings.xml /cm/local/apps/buildmatic/7.1-stable/bin
[root@shadow-head ~] cp /cm/local/apps/buildmatic/common/nfsparams.xml /cm/local/apps/buildmatic/7.1-stable/bin
[root@shadow-head ~] cp /cm/local/apps/buildmatic/common/nfsparams.xml /cm/local/apps/buildmatic/7.1-stable/files

The rpm-store is now populated using a bright DVD. In the following example the rpm-store is populated with a Bright 7.1 version, and with centos 7.1 as the operating system. To add more supported Linux distributions, this step can be repeated with additional Bright ISOs.

The xml buildconfig file is then generated. The index used, “000001” here, must be six digits in length.

A PXE image is generated after that 

[root@shadow-head ~] /cm/local/apps/buildmatic/common/bin/setupbmatic --createrpmdir bright7.1-centos7u1.iso
 
[root@shadow-head ~] /cm/local/apps/buildmatic/7.1-stable/bin/genbuildconfig -v 7.1-stable -d CENTOS7u1 -i 000001

[root@shadow-head ~] /cm/local/apps/buildmatic/7.1-stable/bin/buildmaster /cm/local/apps/buildmatic/7.1-stable/config/000001.xml

The following lines are added to /etc/exports, so that they can be NFS-mounted from the installer (Replace <CIDR> with the public network ip address): 

/home/bright/base-distributions <CIDR>(ro,no_root_squash,async)
/home/bright/rpm-store <CIDR>(ro,no_root_squash,async)
/home/bright/cert-store-pc <CIDR>(ro,no_root_squash,async)

A symbolic link to the directory containing the license file is created and the NFS should be restarted: 

[root@shadow-head ~] cd /home/bright
[root@shadow-head ~] ln -s cert-store cert-store-pc
[root@shadow-head ~] service nfs restart

The shorewall rules for NFS are now uncommented in the file /etc/shorewall/rules: 

# -- Allow NFS traffic from outside to the master
ACCEPT   net            fw              tcp     111   # portmapper
ACCEPT   net            fw              udp     111
ACCEPT   net            fw              tcp     2049  # nfsd
ACCEPT   net            fw              udp     2049
ACCEPT   net            fw              tcp     4000  # statd
ACCEPT   net            fw              udp     4000
ACCEPT   net            fw              tcp     4001  # lockd
ACCEPT   net            fw              udp     4001
ACCEPT   net            fw              udp     4005
ACCEPT   net            fw              tcp     4002  # mountd
ACCEPT   net            fw              udp     4002
ACCEPT   net            fw              tcp     4003  # rquotad
ACCEPT   net            fw              udp     4003

Shorewall is now restarted 

 
[root@shadow-head ~] systemctl restart shorewall

The new dnsmasq configuration is now copied into the openstack software image and also onto the network node. 

[root@shadow-head ~] cp /cm/shared/apps/cm-openstack-caas/etc/dnsmasq.dev.conf /cm/images/openstack-image/etc/neutron
[root@shadow-head ~] scp /cm/shared/apps/cm-openstack-caas/etc/dnsmasq.dev.conf <NETWORK NODE IP>:/etc/neutron

A symlink for the images is created: 

[root@shadow-head ~] ln -s /tftpboot/buildmatic /var/www/html/buildmatic/images

To use cm-openstack-caas, an OpenStack cluster and a cluster user must be added next. Before adding a user, the synchronization of the LDAP users to OpenStack must be enabled. 

[root@shadow-head ~] cmsh -c ‘openstack; use default; settingsusers; set automaticallysyncldapuserstokeystone yes; set writeopenstackrcfilesforusers yes; commit’

The last step for the CaaS installation is to set the MTU of the internal and the vxlan networks to 9000: 

[root@shadow-head ~]# cmsh 
[shadow-head]% network 
[shadow-head->network]% use internalnet                                                                  
[shadow-head->network[internalnet]]% set MTU 9000
[shadow-head->network[internalnet*]]% commit
[shadow-head->network[internalnet]]% show
Parameter                        Value                                         
-------------------------------- ----------------------------------------------
Allow autosign                   Automatic                                      
OpenStack network type           None                                           
Revision                                                                        
Write DNS zone                   BOTH                                           
Base address                     10.141.0.0                                     
Broadcast address                10.141.255.255                                 
Domain Name                      eth.cluster                                    
Dynamic range start              10.141.160.0                                   
Dynamic range end                10.141.167.255                                 
Gateway                          0.0.0.0                                        
IPv6                             no                                             
Lock down dhcpd                  no                                             
MTU                              9000                                           
Management allowed               yes                                            
Netmask bits                     16                                             
Node booting                     yes                                            
Notes                            <0 bytes>                                      
Type                             Internal                                       
name                             internalnet                                    
EC2AvailabilityZone                                                             
EC2SubnetID                                                                     
Private Cloud  

[shadow-head->network[internalnet]]% ..
[shadow-head->network]% use vxlanhostnet                                                             
[shadow-head->network[vxlanhostnet]]% set mtu 9000
[shadow-head->network[vxlanhostnet*]]% commit
[shadow-head->network[vxlanhostnet]]% show
Parameter                         Value                                        
--------------------------------- ---------------------------------------------
Allow autosign                    Automatic                                     
OpenStack Host network                                                          
OpenStack Physical network name   phyvxlanhostnet                               
OpenStack VLAN ID                 0                                             
OpenStack VLAN Range              1:50000                                       
OpenStack alloc pool end          0.0.0.0                                       
OpenStack alloc pool start        0.0.0.0                                       
OpenStack network is shared       no                                            
OpenStack network type            VXLAN Host                                    
Revision                                                                        
Write DNS zone                    BOTH                                          
Base address                      10.161.0.0                                    
Broadcast address                 10.161.255.255                                
Domain Name                       cm.openstack-vxlanhost                        
Dynamic range start               0.0.0.0                                       
Dynamic range end                 0.0.0.0                                       
Gateway                           0.0.0.0                                       
IPv6                              no                                            
Lock down dhcpd                   no                                            
MTU                               9000                                          
Management allowed                no                                            
Netmask bits                      16                                            
Node booting                      no                                            
Notes                             <0 bytes>                                     
Type                              Internal                                      
name                              vxlanhostnet                                  
EC2AvailabilityZone                                                             
EC2SubnetID                                                                     
Private Cloud

Make sure you have the jumbo frame (MTU 9000) enabled on the switch as well.

Retrieved from "http://wiki.define-technology.com/mediawiki-1.35.0/index.php?title=Bright:CaaS&oldid=10721"