Difference between revisions of "Caringo:Landing Page"

Latest revision as of 16:31, 30 January 2017

Error creating thumbnail: File missing

Caringo Swarm Overview

Caringo Swarm version 9.0 Install Prerequisites

Caringo Swarm version 9.0 Install

Caringo Swarm guide

Caringo Swarm Boston labs system

CSN: http://172.28.89.50:8090 login: admin PWD: caringo SSH details: login: root PWD: Boston2016

Cloudprovider: http://172.28.89.19/_admin/portal login: caringoadmin PWD: Boston2016 SSH details: login: root PWD: Boston2016

The above two are the main interaction points for using swarm. Infrastructure pieces below:

Vmware for running the VMS included: 172.28.1.126 login: root PWD: Boston2016

Indexer VM SSH: 172.28.89.18 Login: root PWD: Boston2016

@@ Line 6: / Line 6: @@
 *[[Caringo: Architecture | Caringo Architecture Briefs  ]]
-== Caringo Swarm version 9.0 Minimum Hardware requirements ==
+== Caringo Swarm version 9.0 Install Prerequisites ==
-Component Requirement
+*[[Caringo Swarm Minimum Hardware Requirements]]
+*[[Caringo Swarm Recommended Hardware Requirements]]
+*[[Caringo Swarm Hardware Configurations]]
-*Node x86 with Pentium-class CPUs
+== Caringo Swarm version 9.0 Install ==
-*Number of nodes Three (to ensure adequate recovery space in the event of node failure)
+*[[Caringo: Install | Caringo Hardware spec ]]
-*Switch Nodes must connect to switches configured for multicasting
+*[[Caringo: Install | Installation Steps ]]
-*Node boot capability
-*USB flash drive or network drive
-*Network interfaces One 100 Mbps Ethernet NIC with one RJ-45 port *
-*Hard drives One hard drive
-*RAM 2 GB
-*NTP server To synchronize clocks across nodes
-*To be compatible, all nodes in a cluster must use the same speed network interface.
-== Caringo Swarm version 9.0 Recommended Hardware requirements ==
+== Caringo Swarm guide ==
-Component Requirement
+*[[Caringo: User guide | add user to cloudprovider ]]
-Node x86 with Intel Xeon or AMD Athlon64 (or equivalent) CPUs
+*[[Caringo: EC encoding | Specify EC encoding ]]
-Number of
-nodes
-Three or more
-Switch Nodes must connect to switches configured for multicasting
-Log server To accept incoming SysLog messages
-Node boot
-capability
-USB flash drive or network drive
-Network
-interfaces
-Two Dual Gigabit Ethernet NICs with two RJ-45 ports for link aggregation
-(NIC teaming)
-Hard drives One to four standard non-RAID SATA hard drives
-RAM 4 GB
-NTP server To synchronize clocks across nodes
-== Caringo Swarm version 9.0 Install ==
+== Caringo Swarm Boston labs system ==
-*[[Caringo: Install | Caringo Hardware spec ]]
+CSN: http://172.28.89.50:8090  login: admin  PWD: caringo            SSH details: login: root   PWD: Boston2016
+Cloudprovider: http://172.28.89.19/_admin/portal     login: caringoadmin              PWD: Boston2016            SSH details: login: root           PWD: Boston2016
+The above two are the main interaction points for using swarm. Infrastructure pieces below:
+Vmware for running the VMS included:   172.28.1.126   login: root             PWD: Boston2016
+Indexer VM SSH: 172.28.89.18     Login: root          PWD: Boston2016