Difference between revisions of "Mellanox:Switch config"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
* Baud Radt = 9600 | * Baud Radt = 9600 | ||
| − | Data Bits = 8 | + | * Data Bits = 8 |
| − | Stop Bits = 1 | + | * Stop Bits = 1 |
| − | Parity None | + | * Parity None |
| − | Flow COntrol None | + | * Flow COntrol None |
| − | |||
== Default Login == | == Default Login == | ||
Revision as of 09:45, 2 April 2014
Serial Port Settings
- Baud Radt = 9600
- Data Bits = 8
- Stop Bits = 1
- Parity None
- Flow COntrol None
Default Login
Admin / Admin
Configuration
At the first start up the configuration wizard will start
- Hostname
- DHCP
- zeroconf on mgmt0
- Default gateway
- Primary DNS
- Domain Name
- Enabale IPv6
- Enable IPv6 autoconfig
- Admin Password (enter to leave unchanged
Apply the licence
config terminal
licence apply <key>