Difference between revisions of "Piston:Landing page"

From Define Wiki
Jump to navigation Jump to search
 
(20 intermediate revisions by 3 users not shown)
Line 3: Line 3:
 
== Piston Cloud ==
 
== Piston Cloud ==
  
−
[[Piston:Getting_started | Getting Started]]
+
*[[Piston:Getting_started | Getting Started]]
 +
*[[Piston:OpenStack_intro | What is Open Stack]]
 +
*[[Piston:Definitions | Definitions and Terms]]
  
 
== Installation ==
 
== Installation ==
  
−
[[Piston:prereq | Before You begin]]
+
*[[Piston:prereq | Before You begin]]
−
[[Piston: Installation and COnfiguration]]
+
*[[Piston:understanding_piston_install | Understanding the Piston Installation Process]]
−
[[Piston:Update | Update Piston]]
+
*[[Piston:Networks | Networking Setup]]
−
[[Piston:Advanced | Advanced Installation Options]]
+
*[[Piston:Disks | Disks and Disk-Management]]
 +
*[[Piston:Users,Roles | Users Roles and Authentication]]
 +
*[[Piston: Installation and Configuration]]
 +
*[[Piston:Update | Update Piston]]
 +
*[[Piston:Advanced | Advanced Installation Options]]
  
 
== Operation Guides ==
 
== Operation Guides ==
  
−
[[Piston:
+
*[[Piston: Access using the CLI | Access using the CLI]]
−
[[Piston:
+
*[[Piston: Uploading Images to the Piston Cloud | Uploading Images to the Piston Cloud]]
−
[[Piston:
+
*[[Piston: Command Line Cheatsheet Openstack | Command Line Cheatsheet Openstack ]]
−
[[Piston:
 
−
[[Piston:
 
−
[[Piston:
 
  
 
== Component Guides ==
 
== Component Guides ==
  
−
[[Piston:Ceph| Ceph]]
+
*[[Piston:Ceph| Ceph]]
−
[[Piston:Cinder|Cinder]]
+
*[[Piston:Cinder|Cinder]]
−
[[Piston:Cobalt|Colbalt]]
+
*[[Piston:Cobalt|Colbalt]]
−
[[Piston:Glance|Glance]]
+
*[[Piston:Glance|Glance]]
−
[[Piston:Keystone|Keystone]]
+
*[[Piston:Keystone|Keystone]]
−
[[Piston:Neutron|Neutron]]
+
*[[Piston:Neutron|Neutron]]
−
[[Piston:Nova|Nova]]
+
*[[Piston:Nova|Nova]]
−
[[Piston:Swift|Swift]]
+
*[[Piston:Swift|Swift]]
 +
 
 +
== Notes ==
 +
* notes as i've installed the system
 +
 +
* Accessing the nodes via ssh
 +
<syntaxhighlight>
 +
# access the nodes, do this from the boot node:
 +
sudo su -
 +
(password)
 +
dev ssh
 +
ssh <IP> # ip from the dashboard, access the private address of the nodes
 +
</syntaxhighlight>
 +
 
 +
* Reinstall a system without a full reboot
 +
<syntaxhighlight>
 +
# on the boot node and as root
 +
# edit the conf file
 +
vi /mnt/flash/conf/pentos.conf.used
 +
# then :
 +
dev reinit
 +
</syntaxhighlight>
 +
 
 +
* Check status via CLI (if you can access the web interface)
 +
<syntaxhighlight>
 +
# on boot node
 +
[root@boot-172-16-0-2 ~]# piston-dev.py cluster-info
 +
{u'control': {u'state': u'initialize:wait-for-nodes'},
 +
u'hosts': {u'172.16.1.3': {u'blessed': False,
 +
                            u'context': {},
 +
                            u'diskdata': None,
 +
 
 +
# or use the short version:
 +
[root@boot-172-16-0-2 ~]# piston-dev.py cluster-info -s
 +
{u'control': {u'state': u'optimal'},
 +
u'hosts': {u'172.16.1.2': {u'host_ip': u'172.16.0.13',
 +
                            u'progress': [],
 +
                            u'status': u'ready'},
 +
            u'172.16.1.3': {u'host_ip': u'172.16.0.14',
 +
                            u'progress': [],
 +
                            u'status': u'ready'},
 +
            u'172.16.1.4': {u'host_ip': u'172.16.0.15',
 +
                            u'progress': [],
 +
                            u'status': u'ready'},
 +
            u'172.16.1.5': {u'host_ip': None,
 +
                            u'progress': [],
 +
                            u'status': u'stop'},
 +
            u'172.16.1.6': {u'host_ip': None,
 +
                            u'progress': [],
 +
                            u'status': u'booting'},
 +
            u'172.16.1.7': {u'host_ip': None,
 +
                            u'progress': [],
 +
                            u'status': u'booting'}}}
 +
</syntaxhighlight>
 +
 
 +
* Force reinstall
 +
<syntaxhighlight>
 +
# create the file destroy-data on the USB root
 +
# or on the boot node:
 +
touch /mnt/usb1/destroy-data
 +
</syntaxhighlight>
 +
 
 +
* Problems with IPMI (timeouts, commands should complete in <2 seconds)
 +
<syntaxhighlight>
 +
# this is the command piston will use on the IPMI module - test out on the boot node to diagnose IPMI issues
 +
[root@boot-172-16-0-2 log]# ipmi-chassis --session-timeout 1999 --retransmission-timeout 1000 -u admin -p admin -D LAN_2_0 -h 172.16.1.5 --get-status
 +
ipmi_ctx_open_outofband_2_0: session timeout
 +
# above is bad! below is what you want to see
 +
[root@boot-172-16-0-2 log]# ipmi-chassis -u admin -p admin -D LAN_2_0 -h 172.16.1.5 --get-status
 +
System Power                        : off
 +
Power overload                      : false
 +
Interlock                          : inactive
 +
Power fault                        : false
 +
Power control fault                : false
 +
Power restore policy                : Always off
 +
Last Power Event                    : power on via ipmi c
 +
 
 +
### If you are seeing IPMI timeouts, its probably because eth0/eth1 trying bonding, see the MACs are the same below (we've only one cable plugged in in this instance)
 +
 
 +
eth0: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500
 +
        ether 00:25:90:4b:7a:85  txqueuelen 1000  (Ethernet)
 +
 
 +
eth1: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500
 +
        ether 00:25:90:4b:7a:85  txqueuelen 1000  (Ethernet)
 +
 
 +
[root@boot-172-16-0-2 log]# ifconfig eth1 down
 +
[root@boot-172-16-0-2 log]# ipmi-chassis --session-timeout 1999 --retransmission-timeout 1000 -u admin -p admin -D LAN_2_0 -h 172.16.1.5 --get-status
 +
System Power                        : off
 +
Power overload                      : false
 +
Interlock                          : inactive
 +
Power fault                        : false
 +
Power control fault                : false
 +
Power restore policy                : Always off
 +
Last Power Event                    : power on via ipmi command
 +
Chassis intrusion                  : inactive
 +
Front panel lockout                : inactive
 +
Drive Fault                        : false
 +
Cooling/fan fault                  : false
 +
Chassis Identify state              : off
 +
Power off button                    : enabled
 +
Reset button                        : enabled
 +
Diagnostic Interrupt button        : enabled
 +
Standby button                      : enabled
 +
Power off button disable            : unallowed
 +
Reset button disable                : unallowed
 +
Diagnostic interrupt button disable : unallowed
 +
Standby button disable              : unallowed
 +
 
 +
</syntaxhighlight>
 +
 
 +
* Monitoring the install from the boot node
 +
<syntaxhighlight>
 +
tail -f /var/log/cmessages | egrep -i '(error|trace|critical|fail)'
 +
 
 +
# Good command to check and make sure the IPMI dhcp ok and then pass the status check:
 +
tail -f /var/log/cmessages | egrep -i '(dhcp|ipmi)'
 +
 
 +
</syntaxhighlight>
 +
 
 +
* working cloud.conf for piston 3.5: (please ref to switch conf also: http://wiki.bostonlabs.co.uk/w/index.php/Supermicro:_Setting_up_VLANs_and_Routing_within_an_SSE-X24_Switch )
 +
* '''NOTE''': The default password is still the default hash: $6$2EFLpDNp$Example.reAyhjN90s.qORBBABvA0CExsiVcrKgZwz5uOwlLW7rRrCZJXjA5dQfHlA7L11c2n37nhcRav0aaa1
 +
* Login for the first time with admin/hash above
 +
 
 +
<syntaxhighlight>
 +
# removed all the comment lines:
 +
[root@boot-172-16-0-2 usb1]# grep "^[^#;]" cloud.conf
 +
 
 +
 
 +
 
 +
 
 +
[role profile BootNodeAdmin]
 +
management api enabled = false
 +
boot node enabled = true
 +
 
 +
[role profile ClusterAdmin]
 +
management api enabled = true
 +
 
 +
 
 +
[user profile admin]
 +
role = BootNodeAdmin, ClusterAdmin
 +
secret = $6$Mjc/QBXGf2Y$/l9f2jVxbeKkkk5KiyPxMD4k0MQggVLhZvjLI9NWD1CO2Fwzs1dyDsyKJ7RewfSG9nBipLMO0ySq7IlTvC5C2.
 +
 
 +
[user profile piston-admin]
 +
role = ClusterAdmin
 +
secret = $6$rounds=60000$Example.Jkvnr3vC$wRiggCNQhj/qthYCLqFTFPOs2eil.0DsAe8qGw.UyQEejk9u6qk/hhWdwrYFIdArbmY4RGxVw7
 +
 
 +
 
 +
[network]
 +
host_net=172.16.0.0/24
 +
 
 +
 
 +
host_bootnode_ip=172.16.0.2
 +
 
 +
 
 +
 
 +
management_net=172.16.1.0/24
 +
 
 +
 
 +
 
 +
 
 +
services_net=172.16.2.0/26
 +
 
 +
 
 +
 
 +
services_vlan=2
 +
 
 +
 
 +
cloud_net=172.16.3.0/24
 +
 
 +
 
 +
 
 +
cloud_vlan=3
 +
 
 +
 
 +
public_net=172.16.4.0/24
 +
 
 +
 
 +
 
 +
public_vlan=4
 +
 
 +
 
 +
ntp_servers=pool.ntp.org
 +
 
 +
dns_servers=8.8.8.8,8.8.4.4
 +
 
 +
 
 +
type=nova-network
 +
 
 +
[disk profile ceph]
 +
count_min=1
 +
size_min=100GB
 +
ssd=always
 +
partitions=ceph_journal,ceph_journal,ceph_monitor,identity,ceph_data
 +
priority=1
 +
 
 +
[disk profile ephemeral]
 +
count_min=1
 +
size_min=500GB
 +
ssd=never
 +
partitions=identity,ceph_data,ephemeral:500GB
 +
priority=2
 +
 
 +
 
 +
[auth]
 +
type=local
 +
 
 +
[local_auth]
 +
admin_username=admin
 +
admin_password=$6$2EFLpDNp$Example.reAyhjN90s.qORBBABvA0CExsiVcrKgZwz5uOwlLW7rRrCZJXjA5dQfHlA7L11c2n37nhcRav0aaa1
 +
 
 +
[ldap_auth]
 +
url=ldap://ldap.example.com
 +
user=CN=ldapadmin,CN=Users,DC=example,DC=com
 +
password=BadPassword
 +
suffix=DC=example,DC=com
 +
tenant_tree_dn=OU=Piston,DC=example,DC=com
 +
tenant_objectclass=organizationalUnit
 +
tenant_id_attribute=ou
 +
tenant_name_attribute=displayName
 +
user_tree_dn=CN=Users,DC=example,DC=com
 +
user_objectclass=person
 +
user_id_attribute=cn
 +
user_name_attribute=cn
 +
user_attribute_ignore=password,tenant_id,tenants
 +
user_enabled_attribute=userAccountControl
 +
user_enabled_default=512
 +
user_enabled_mask=2
 +
role_tree_dn=OU=Piston,DC=example,DC=com
 +
role_objectclass=group
 +
role_id_attribute=cn
 +
role_name_attribute=displayName
 +
role_member_attribute=member
 +
 
 +
 
 +
[snmp]
 +
enabled=no
 +
community=piston
 +
 
 +
 
 +
[dashboard]
 +
 
 +
 
 +
 
 +
[servers]
 +
server_count=5
 +
 
 +
image_cache_size=204800
 +
 
 +
ipmi_user=admin
 +
ipmi_pass=admin
 +
 
 +
 
 +
 
 +
 
 +
 
 +
</syntaxhighlight>
 +
 
 +
Jon's cloud.conf file:
 +
<syntaxhighlight>
 +
[role profile BootNodeAdmin]
 +
management api enabled = false
 +
boot node enabled = true
 +
 
 +
[role profile ClusterAdmin]
 +
management api enabled = true
 +
 
 +
[user profile admin]
 +
role = BootNodeAdmin, ClusterAdmin
 +
 
 +
secret = $6$twnChnKbtTmi8$oCVMXrbVivv7U.Ev4bXe3VvWg8o1lNQwdfQxFbZkE/cqJeB7dtGwWjrnrK5VFlkOgHvVq4gdZqUYEgRmrIVga.
 +
 
 +
[user profile piston-admin]
 +
role = ClusterAdmin
 +
secret = $6$twnChnKbtTmi8$oCVMXrbVivv7U.Ev4bXe3VvWg8o1lNQwdfQxFbZkE/cqJeB7dtGwWjrnrK5VFlkOgHvVq4gdZqUYEgRmrIVga.
 +
 
 +
[network]
 +
host_net=172.16.0.0/24
 +
host_bootnode_ip=172.16.0.2
 +
management_net=172.16.1.0/24
 +
services_net=172.16.2.0/26
 +
services_vlan=2
 +
cloud_net=172.16.3.0/24
 +
cloud_vlan=3
 +
public_net=172.16.4.0/24
 +
public_vlan=4
 +
 
 +
ntp_servers=pool.ntp.org
 +
dns_servers=8.8.8.8,8.8.4.4
 +
type=nova-network
 +
 
 +
[disk profile ceph]
 +
count_min=1
 +
size_min=100GB
 +
ssd=always
 +
partitions=ceph_journal,ceph_journal,ceph_monitor,identity,ceph_data
 +
priority=1
 +
 
 +
[disk profile ephemeral]
 +
count_min=1
 +
size_min=500GB
 +
ssd=never
 +
partitions=identity,ceph_data,ephemeral:500GB
 +
priority=2
 +
 
 +
[auth]
 +
type=local
 +
 
 +
[local_auth]
 +
admin_username=admin
 +
admin_password=$6$twnChnKbtTmi8$oCVMXrbVivv7U.Ev4bXe3VvWg8o1lNQwdfQxFbZkE/cqJeB7dtGwWjrnrK5VFlkOgHvVq4gdZqUYEgRmrIVga.
 +
 
 +
[ldap_auth]
 +
url=ldap://ldap.example.com
 +
user=CN=ldapadmin,CN=Users,DC=example,DC=com
 +
password=BadPassword
 +
suffix=DC=example,DC=com
 +
tenant_tree_dn=OU=Piston,DC=example,DC=com
 +
tenant_objectclass=organizationalUnit
 +
tenant_id_attribute=ou
 +
tenant_name_attribute=displayName
 +
user_tree_dn=CN=Users,DC=example,DC=com
 +
user_objectclass=person
 +
user_id_attribute=cn
 +
user_name_attribute=cn
 +
user_attribute_ignore=password,tenant_id,tenants
 +
user_enabled_attribute=userAccountControl
 +
user_enabled_default=512
 +
user_enabled_mask=2
 +
role_tree_dn=OU=Piston,DC=example,DC=com
 +
role_objectclass=group
 +
role_id_attribute=cn
 +
role_name_attribute=displayName
 +
role_member_attribute=member
 +
 
 +
[snmp]
 +
enabled=no
 +
community=piston
 +
 
 +
[dashboard]
 +
 
 +
[servers]
 +
server_count=3
 +
 
 +
image_cache_size=204800
 +
 
 +
ipmi_user=admin
 +
ipmi_pass=admin
 +
</syntaxhighlight>

Latest revision as of 21:02, 27 March 2015

Error creating thumbnail: File missing

Piston Cloud

Installation

Operation Guides

Component Guides

Notes

  • notes as i've installed the system
  • Accessing the nodes via ssh
# access the nodes, do this from the boot node: 
sudo su - 
(password)
dev ssh 
ssh <IP> # ip from the dashboard, access the private address of the nodes
  • Reinstall a system without a full reboot
# on the boot node and as root
# edit the conf file 
vi /mnt/flash/conf/pentos.conf.used 
# then :
dev reinit
  • Check status via CLI (if you can access the web interface)
# on boot node 
[root@boot-172-16-0-2 ~]# piston-dev.py cluster-info 
{u'control': {u'state': u'initialize:wait-for-nodes'},
 u'hosts': {u'172.16.1.3': {u'blessed': False,
                            u'context': {},
                            u'diskdata': None,

# or use the short version: 
[root@boot-172-16-0-2 ~]# piston-dev.py cluster-info -s
{u'control': {u'state': u'optimal'},
 u'hosts': {u'172.16.1.2': {u'host_ip': u'172.16.0.13',
                            u'progress': [],
                            u'status': u'ready'},
            u'172.16.1.3': {u'host_ip': u'172.16.0.14',
                            u'progress': [],
                            u'status': u'ready'},
            u'172.16.1.4': {u'host_ip': u'172.16.0.15',
                            u'progress': [],
                            u'status': u'ready'},
            u'172.16.1.5': {u'host_ip': None,
                            u'progress': [],
                            u'status': u'stop'},
            u'172.16.1.6': {u'host_ip': None,
                            u'progress': [],
                            u'status': u'booting'},
            u'172.16.1.7': {u'host_ip': None,
                            u'progress': [],
                            u'status': u'booting'}}}
  • Force reinstall
# create the file destroy-data on the USB root 
# or on the boot node: 
touch /mnt/usb1/destroy-data
  • Problems with IPMI (timeouts, commands should complete in <2 seconds)
# this is the command piston will use on the IPMI module - test out on the boot node to diagnose IPMI issues
[root@boot-172-16-0-2 log]# ipmi-chassis --session-timeout 1999 --retransmission-timeout 1000 -u admin -p admin -D LAN_2_0 -h 172.16.1.5 --get-status
ipmi_ctx_open_outofband_2_0: session timeout
# above is bad! below is what you want to see
[root@boot-172-16-0-2 log]# ipmi-chassis -u admin -p admin -D LAN_2_0 -h 172.16.1.5 --get-status
System Power                        : off
Power overload                      : false
Interlock                           : inactive
Power fault                         : false
Power control fault                 : false
Power restore policy                : Always off
Last Power Event                    : power on via ipmi c

### If you are seeing IPMI timeouts, its probably because eth0/eth1 trying bonding, see the MACs are the same below (we've only one cable plugged in in this instance)

eth0: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500
        ether 00:25:90:4b:7a:85  txqueuelen 1000  (Ethernet)

eth1: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500
        ether 00:25:90:4b:7a:85  txqueuelen 1000  (Ethernet)

[root@boot-172-16-0-2 log]# ifconfig eth1 down 
[root@boot-172-16-0-2 log]# ipmi-chassis --session-timeout 1999 --retransmission-timeout 1000 -u admin -p admin -D LAN_2_0 -h 172.16.1.5 --get-status
System Power                        : off
Power overload                      : false
Interlock                           : inactive
Power fault                         : false
Power control fault                 : false
Power restore policy                : Always off
Last Power Event                    : power on via ipmi command
Chassis intrusion                   : inactive
Front panel lockout                 : inactive
Drive Fault                         : false
Cooling/fan fault                   : false
Chassis Identify state              : off
Power off button                    : enabled
Reset button                        : enabled
Diagnostic Interrupt button         : enabled
Standby button                      : enabled
Power off button disable            : unallowed
Reset button disable                : unallowed
Diagnostic interrupt button disable : unallowed
Standby button disable              : unallowed
  • Monitoring the install from the boot node
tail -f /var/log/cmessages | egrep -i '(error|trace|critical|fail)'

# Good command to check and make sure the IPMI dhcp ok and then pass the status check:
tail -f /var/log/cmessages | egrep -i '(dhcp|ipmi)'
# removed all the comment lines: 
[root@boot-172-16-0-2 usb1]# grep "^[^#;]" cloud.conf 




[role profile BootNodeAdmin]
management api enabled = false
boot node enabled = true

[role profile ClusterAdmin]
management api enabled = true


[user profile admin]
role = BootNodeAdmin, ClusterAdmin
secret = $6$Mjc/QBXGf2Y$/l9f2jVxbeKkkk5KiyPxMD4k0MQggVLhZvjLI9NWD1CO2Fwzs1dyDsyKJ7RewfSG9nBipLMO0ySq7IlTvC5C2.

[user profile piston-admin]
role = ClusterAdmin
secret = $6$rounds=60000$Example.Jkvnr3vC$wRiggCNQhj/qthYCLqFTFPOs2eil.0DsAe8qGw.UyQEejk9u6qk/hhWdwrYFIdArbmY4RGxVw7


[network]
host_net=172.16.0.0/24


host_bootnode_ip=172.16.0.2



management_net=172.16.1.0/24




services_net=172.16.2.0/26



services_vlan=2


cloud_net=172.16.3.0/24



cloud_vlan=3


public_net=172.16.4.0/24



public_vlan=4


ntp_servers=pool.ntp.org

dns_servers=8.8.8.8,8.8.4.4


type=nova-network

[disk profile ceph]
count_min=1
size_min=100GB
ssd=always
partitions=ceph_journal,ceph_journal,ceph_monitor,identity,ceph_data
priority=1

[disk profile ephemeral]
count_min=1
size_min=500GB
ssd=never
partitions=identity,ceph_data,ephemeral:500GB
priority=2


[auth]
type=local

[local_auth]
admin_username=admin
admin_password=$6$2EFLpDNp$Example.reAyhjN90s.qORBBABvA0CExsiVcrKgZwz5uOwlLW7rRrCZJXjA5dQfHlA7L11c2n37nhcRav0aaa1

[ldap_auth]
url=ldap://ldap.example.com
user=CN=ldapadmin,CN=Users,DC=example,DC=com
password=BadPassword
suffix=DC=example,DC=com
tenant_tree_dn=OU=Piston,DC=example,DC=com
tenant_objectclass=organizationalUnit
tenant_id_attribute=ou
tenant_name_attribute=displayName
user_tree_dn=CN=Users,DC=example,DC=com
user_objectclass=person
user_id_attribute=cn
user_name_attribute=cn
user_attribute_ignore=password,tenant_id,tenants
user_enabled_attribute=userAccountControl
user_enabled_default=512
user_enabled_mask=2
role_tree_dn=OU=Piston,DC=example,DC=com
role_objectclass=group
role_id_attribute=cn
role_name_attribute=displayName
role_member_attribute=member


[snmp]
enabled=no
community=piston


[dashboard]



[servers]
server_count=5

image_cache_size=204800

ipmi_user=admin
ipmi_pass=admin

Jon's cloud.conf file: 

[role profile BootNodeAdmin]
management api enabled = false
boot node enabled = true

[role profile ClusterAdmin]
management api enabled = true

[user profile admin]
role = BootNodeAdmin, ClusterAdmin

secret = $6$twnChnKbtTmi8$oCVMXrbVivv7U.Ev4bXe3VvWg8o1lNQwdfQxFbZkE/cqJeB7dtGwWjrnrK5VFlkOgHvVq4gdZqUYEgRmrIVga.

[user profile piston-admin]
role = ClusterAdmin
secret = $6$twnChnKbtTmi8$oCVMXrbVivv7U.Ev4bXe3VvWg8o1lNQwdfQxFbZkE/cqJeB7dtGwWjrnrK5VFlkOgHvVq4gdZqUYEgRmrIVga.

[network]
host_net=172.16.0.0/24
host_bootnode_ip=172.16.0.2
management_net=172.16.1.0/24
services_net=172.16.2.0/26
services_vlan=2
cloud_net=172.16.3.0/24
cloud_vlan=3
public_net=172.16.4.0/24
public_vlan=4

ntp_servers=pool.ntp.org
dns_servers=8.8.8.8,8.8.4.4
type=nova-network

[disk profile ceph]
count_min=1
size_min=100GB
ssd=always
partitions=ceph_journal,ceph_journal,ceph_monitor,identity,ceph_data
priority=1

[disk profile ephemeral]
count_min=1
size_min=500GB
ssd=never
partitions=identity,ceph_data,ephemeral:500GB
priority=2

[auth]
type=local

[local_auth]
admin_username=admin
admin_password=$6$twnChnKbtTmi8$oCVMXrbVivv7U.Ev4bXe3VvWg8o1lNQwdfQxFbZkE/cqJeB7dtGwWjrnrK5VFlkOgHvVq4gdZqUYEgRmrIVga.

[ldap_auth]
url=ldap://ldap.example.com
user=CN=ldapadmin,CN=Users,DC=example,DC=com
password=BadPassword
suffix=DC=example,DC=com
tenant_tree_dn=OU=Piston,DC=example,DC=com
tenant_objectclass=organizationalUnit
tenant_id_attribute=ou
tenant_name_attribute=displayName
user_tree_dn=CN=Users,DC=example,DC=com
user_objectclass=person
user_id_attribute=cn
user_name_attribute=cn
user_attribute_ignore=password,tenant_id,tenants
user_enabled_attribute=userAccountControl
user_enabled_default=512
user_enabled_mask=2
role_tree_dn=OU=Piston,DC=example,DC=com
role_objectclass=group
role_id_attribute=cn
role_name_attribute=displayName
role_member_attribute=member

[snmp]
enabled=no
community=piston

[dashboard]

[servers]
server_count=3

image_cache_size=204800

ipmi_user=admin
ipmi_pass=admin
Retrieved from "http://wiki.define-technology.com/mediawiki-1.35.0/index.php?title=Piston:Landing_page&oldid=6171"