Difference between revisions of "CUDA: Installing CUDA and Building the SDK"
Jump to navigation
Jump to search
(Created page with "===== Cuda 1.1 on Rocks 4.3 ===== installed the sdk/toolkit and driver Problem linking with -lglut, do the following: <pre> ln -s /usr/lib/libglut.so.3 /usr/lib/libglut.so...") |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 333: | Line 333: | ||
sh ./devdriver_4.0_linux_64_270.41.19.run --kernel-source-path /usr/src/kernels/kernel version | sh ./devdriver_4.0_linux_64_270.41.19.run --kernel-source-path /usr/src/kernels/kernel version | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| + | |||
| + | == Cuda 5 / PCM 3.2 == | ||
| + | |||
| + | [[CUDA: Installing CUDA 5]] | ||
Latest revision as of 12:01, 14 December 2012
Cuda 1.1 on Rocks 4.3
installed the sdk/toolkit and driver
Problem linking with -lglut, do the following:
ln -s /usr/lib/libglut.so.3 /usr/lib/libglut.so ln -s /usr/lib64/libglut.so.3 /usr/lib64/libglut.so
Adding CUDA roll to installed headnode
mount -o loop cuda-4.3.0-x86_64.disk1.iso /mnt/cdrom
rocks add roll
rocks enable roll cuda
rocks list roll
# then on the node you want to install on
cd /home/install/rolls/cuda/4.3/x86_64/RedHat/RPMS/
# load the sdk and toolkit
rpm -i cuda-* \
/home/install/rolls/os/4.3/x86_64/RedHat/RPMS/freeglut-2.2.0-14.x86_64.rpm \
/home/install/rolls/os/4.3/x86_64/RedHat/RPMS/xorg-x11-Mesa-libGLU-6.8.2-1.EL.18.x86_64.rpm
# load the nvidia driver
rpm -ivh nvidia-driver*
# needs kernel source on the node
yum install kernel-devel
Centos/Rocks 5
If installing on a headnode with no nvidia gpu
./NVIDIA-Linux-x86_64-180.22-pkg2.run --no-kernel-module --accept-license --no-questions --silent
Install the SDK and Toolkit to a shared directory
mkdir /opt/cuda/toolkit/2.1 ./cudatoolkit_2.1_linux64_rhel5.2.run -- -prefix=/opt/cuda/toolkit/2.1/ mkdir /opt/cuda/sdk/2.1 ./cuda-sdk-linux-2.10.1215.2015-3233425.run -- -prefix=/opt/cuda/sdk/2.1/ -cudaprefix=/opt/cuda/toolkit/2.1/
Build the sdk (g++ missing plus a few others)
export PATH=/share/apps/cuda/toolkit/2.3/bin/:$PATH export LD_LIBRARY_PATH=/share/apps/cuda/toolkit/2.3/lib64:$LD_LIBRARY_PATH export INCLUDE=/share/apps/cuda/toolkit/2.3/include/:$INCLUDE export CUDA_INSTALL_PATH=/share/apps/cuda/toolkit/2.3 [or edit the common/common.mk to point at the right CUDA install dir] yum install libXi-devel yum install libXmu-devel yum install gcc kernel-devel gcc-c++ freeglut.i386 freeglut.x86_64 freeglut-devel glibc-devel # Had to do this for cuda 2.1, dont think it's necessary in newer versions ln -s /usr/lib64/libGLU.so.1 /usr/lib64/libGLU.so
Centos 5.4 - CUDA 2.3 - PSC
0) Make sure you have internet access as you need additional libs and packages.
1) Install Centos 5.4 with full development system (include gcc-c++), kernel-devel, kernel-header (or yum install gcc gcc-c++ kernel-devel, kernel-header)
2) yum install freeglut freeglut-devel
3) yum install libICE-devel libSM-devel libXi-devel libXmu-devel libXmu libXt-devel
4) yum install mesa-LibGLU-devel mesa-libGLU xorg-x11-util-macros
5) mkdir -p /opt/cuda/2.3/toolkit /opt/cuda/2.3/sdk
6) Stop Xserver if running
7) ./NVIDIA-Linux-x86_64_190.53-pkg2.run
8) ./cudatoolkit_2.3_linux_64_rhel5.3.run -- -prefix=/opt/cuda/2.3/toolkit
9) export PATH=$PATH:/opt/cuda/2.3/toolkit/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/cuda/2.3/toolkit/lib64
export INCLUDE=/opt/cuda/2.3/toolkit/include/:$INCLUDE
export CUDA_INSTALL_PATH=/opt/cuda/2.3/toolkit
10)./cudasdk_2.3_linux.run -- -prefix=/opt/cuda/2.3/sdk -cudaprefix=/opt/cuda/2.3/toolkit
11) cd /opt/cuda/2.3/sdk/C
12) Build sdk sampe program:
make
13) Check GPU device: /opt/cuda/2.3/sdk/C/bin/linux/release/deviceQuery --noprompt
14) Change display setting (/etc/X11/xorg.conf)- May differ for different monitor
Section "Monitor"
HorizSync 31.0 - 65.0
VertRefresh 50.0 - 60.0
Section "Screen"
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600"
OpenSUSE 11.1 - CUDA 2.3 -PSC
zypper install freeglut-devel
./cudadriver_2.3_linux_64_190.18.run OR ./cudadriver_2.3_linux_64_190.18.run --accept-license --no-questions --silent (not tested)
Display setting (/etc/X11/xorg.conf)
Section "Monitor"
HorizSync 31.0 - 65.0
VertRefresh 50.0 - 60.0
Section "Screen"
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600"
Install the SDK and Toolkit to a shared directory
mkdir /opt/cuda/toolkit/2.3 ./cudatoolkit_2.3_linux64_suse11.run -- -prefix=/opt/cuda/toolkit/2.1/ export PATH=$PATH:/opt/cuda/toolkit/2.3/bin export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/cuda/toolkit/2.3/lib64 export INCLUDE=/opt/cuda/toolkit/2.3/include/:$INCLUDE export CUDA_INSTALL_PATH=/opt/cuda/toolkit/2.3 mkdir /opt/cuda/sdk/2.3 ./cudasdk_2.3_linux.run -- -prefix=/opt/cuda/sdk/2.3/ -cudaprefix=/opt/cuda/toolkit/2.3/
Build SDK
cd /opt/cuda/sdk/2.3/C make
Ubuntu 8.04.2
Note:
CUDA 2.1 & ubuntu 8.04.2 have problem with top manubar nevigation.
To wrokaround the problem, Change (line 79/80) /usr/bin/compiz
From: INDIRECT="no"
To : INDIRECT="yes"
Also, nvidia-xconfig from CUDA 2.1 does not generate xorg.conf correctly
whereas CUDA 2.0 does. Need to set the VertSync & HorSync manually.
1) Install Ubuntu 8.04.2 and make sure it can access the internet.
2) sudo apt-get install ssh
3) Put LiveCD to drive and 'sudo apt-cdrom add'
4) sudo apt-get update
5) sudo apt-get install build-essential
6) sudo apt-get install --resinstall mesa-common-dev
7) sudo apt-get libx11-dev freeglut3-dev freeglut3
8) sudo apt-get install libxi-dev
9) sudo apt-get install libxmu-dev
10) sudo apt-get install libc6-dev-i386
11) sudo apt-get remove nvidia-kernel-common
12) sudo ./NVIDIA-Linux-x86_64-180.22-pkg2.run
13) sudo ./cudatoolkit_2.1_linux64_ubuntu8.04.run
14) sudo ./cuda-sdk-linux-2.10.1215.2015-3233425.run
15) cd /usr/local/NVIDIA_CUDA_SDK; sudo make
16) add 'PATH=$PATH:/usr/local/cuda/bin:/usr/local/NVIDIA_CUDA_SDK/bin/linux/release; export PATH'
to /etc/skel/.bashrc or $HOME/.bashrc
17) add 'LD_LIBRARY_PATH=/usr/local/cuda/lib; export LD_LIBRARY_PATH'
to /etc/skel/.bashrc or $HOME/.bashrc
18) add /etc/X11/xorg.conf:
==> Section Monitor"
HorizSync 31.0 - 65.0
VertRefresh 51.0 - 90.0
EndSubSection
==> SubSection "Display"
Depth 24
Modes "1280x1024_60"
EndSubSection
19) Checks CUDA /usr/local/NVIDIA_CUDA_SDK/bin/linux/release/deviceQuery
Ubuntu 9.04 and CUDA 2.3
# ubuntu 9.04 and cuda 2.3 ctrl + alt + f1 login sudo /etc/init.d/gdm stop cd /media/disk (dir with the CUDA apps) # install driver sudo ./NVIDIA-Linux-x86_64-190.53-pkg2.run Q. Run nvidia-xconfig utility (yes) # install toolkit ./cudatoolkit_2.3_linux_64_ubuntu9.04.run go with default [/usr/local/cuda] # install sdk ./cudasdk_2.3_linux.run # no sudo! # setup environment, edit ~/.bashrc # append the following: export PATH=$PATH:/usr/local/cuda/bin export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/cuda/lib64 # additional packages to build SDK sudo apt-get install build-essential libglut3-dev libxmu-dev libxmu-headers libxi-dev # build the sdk cd ~/NVIDIA_GPU_Computing_SDK/C make At this stage, best off to reboot the system gdm wouldnt restart correctly # check the sdk login, open up an xterm [alt+f2, xterm] cd NVIDIA_GPU_Computing_SDK/C/bin/linux/release ./deviceQuery [should show all the nvidia cards connected] ./nbody [make sure the graphical display is running ok]
Ubuntu 9.10 and CUDA 2.3
# 9.10 has gcc 4.4 which does not work with CUDA 2.3 # If someone updates to 9.10 run the following commands: sudo update-alternatives /usr/bin/gcc gcc /usr/bin/gcc-4.3 60 sudo update-alternatives /usr/bin/g++ g++ /usr/bin/g++-4.3 60 # install 4.3 if necessary
Platform 3.0 / Centos 5.6 / Cuda 4.0
# Install all the required RPMs to build nvidia kernel and SDK
yum install libXi-devel libXmu-devel gcc kernel-devel gcc-c++ freeglut.i386 freeglut.x86_64 freeglut-devel glibc-devel kernel-source
Resulted in:
(1/32): libXdmcp-devel-1.0.1-2.1.x86_64.rpm | 7.5 kB 00:00
(2/32): xorg-x11-util-macros-1.0.2-4.fc6.x86_64.rpm | 8.1 kB 00:00
(3/32): libSM-devel-1.0.1-3.1.x86_64.rpm | 9.4 kB 00:00
(4/32): libXau-devel-1.0.1-3.1.x86_64.rpm | 11 kB 00:00
(5/32): libICE-devel-1.0.1-2.1.x86_64.rpm | 13 kB 00:00
(6/32): libXxf86vm-1.0.1-3.1.i386.rpm | 14 kB 00:00
(7/32): libXxf86vm-1.0.1-3.1.x86_64.rpm | 14 kB 00:00
(8/32): libdrm-2.0.2-1.1.i386.rpm | 19 kB 00:00
(9/32): libdrm-2.0.2-1.1.x86_64.rpm | 19 kB 00:00
(10/32): libXmu-devel-1.0.2-5.i386.rpm | 21 kB 00:00
(11/32): libXmu-devel-1.0.2-5.x86_64.rpm | 21 kB 00:00
(12/32): libSM-1.0.1-3.1.i386.rpm | 27 kB 00:00
(13/32): libXi-devel-1.0.1-4.el5_4.x86_64.rpm | 51 kB 00:00
(14/32): libXi-devel-1.0.1-4.el5_4.i386.rpm | 51 kB 00:00
(15/32): libICE-1.0.1-2.1.i386.rpm | 54 kB 00:00
(16/32): libXmu-1.0.2-5.i386.rpm | 62 kB 00:00
(17/32): mesa-libGLU-devel-6.5.1-7.8.el5.x86_64.rpm | 91 kB 00:00
(18/32): freeglut-devel-2.4.0-7.1.el5.i386.rpm | 98 kB 00:00
(19/32): freeglut-devel-2.4.0-7.1.el5.x86_64.rpm | 111 kB 00:00
(20/32): freeglut-2.4.0-7.1.el5.i386.rpm | 142 kB 00:00
(21/32): freeglut-2.4.0-7.1.el5.x86_64.rpm | 150 kB 00:00
(22/32): libXt-1.0.2-3.2.el5.i386.rpm | 173 kB 00:00
(23/32): mesa-libGLU-6.5.1-7.8.el5.x86_64.rpm | 224 kB 00:00
(24/32): mesa-libGLU-6.5.1-7.8.el5.i386.rpm | 225 kB 00:00
(25/32): xorg-x11-proto-devel-7.1-13.el5.x86_64.rpm | 247 kB 00:00
(26/32): libXt-devel-1.0.2-3.2.el5.x86_64.rpm | 330 kB 00:00
(27/32): mesa-libGL-devel-6.5.1-7.8.el5.x86_64.rpm | 461 kB 00:00
(28/32): libX11-devel-1.0.3-11.el5.x86_64.rpm | 661 kB 00:00
(29/32): glibc-devel-2.5-58.i386.rpm | 2.0 MB 00:00
(30/32): kernel-devel-2.6.18-238.el5.x86_64.rpm | 5.5 MB 00:00
(31/32): mesa-libGL-6.5.1-7.8.el5.x86_64.rpm | 8.7 MB 00:00
(32/32): mesa-libGL-6.5.1-7.8.el5.i386.rpm | 9.6 MB 00:00
# Note: Do checks the kernel, kernel-headers and kernel-devel are on the same version number
# after yum install kernel-headers and kernel-devel. If not, you will need to update the
# "kernel" to the same version as kernel-devel and kernel-headers.
# Install the CUDA device driver (assuming node has GPU, otherwise include --no-kernel-module)
./devdriver_4.0_linux_64_270.41.19.run --accept-license --no-questions --silent
# Install the CUDA toolkit
mkdir -p /opt/cuda/4.0/toolkit
./cudatoolkit_4.0.17_linux_64_rhel5.5.run -- -prefix=/opt/cuda/4.0/toolkit
export PATH=$PATH:/opt/cuda/4.0/toolkit/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/cuda/4.0/toolkit/lib64:/opt/cuda/4.0/toolkit/lib
export CUDA_INSTALL_PATH=/opt/cuda/4.0/toolkit
# Install CUDA Tools
mkdir -p /opt/cuda/4.0/cudatools
./cudatools_4.0.17_linux_64.run -- -prefix=/opt/cuda/4.0/cudatools
# Install CUDA SDK
mkdir -p /opt/cuda/4.0/sdk
./gpucomputingsdk_4.0.17_linux.run -- -prefix=/opt/cuda/4.0/sdk/ -cudaprefix=/opt/cuda/4.0/toolkit/
# Build CUDA SDK
cd /opt/cuda/4.0/sdk
make
export PATH=$PATH:/opt/cuda/4.0/sdk/C/bin/linux/release/Installing from Kit with Platform 3.0.1/3.1
Note: The kit does not appear to isntall the SKD toolkit automatically so be sure to add the following to your custom scripts
# Dependencies needed if not already install before compiling GPU SDK (RHEL 6.2)
# in RHEL 6.2 CD: freeglut-2.6.0-1.el6.i686.rpm, freeglut-2.6.0-1.el6.x86_64.rpm,
# freeglut-devel-2.6.0-1.el6.x86_64.rpm, mesa-libGL-devel-7.11-3.el6.x86_64.rpm
# mesa-libGLU-devel-7.11-3.el6.x86_64.rpm, libXfixes-devel-4.0.4-1.el6.x86_64.rpm
# libXdamage-devel-1.1.2-1.el6.x86_64.rpm, libXxf86vm-devel-1.1.0-1.el6.x86_64.rpm
# libdrm-devel-2.4.25-2.el6.x86_64.rpm
#
#
# In .bashrc or .bash_profile, add:
# export PATH=/usr/local/cuda/bin:/usr/local/cuda_sdk/C/bin/linux/release:$PATH
# export LD_LIBRARY_PATH=/usr/local/cuda/lib64:/usr/local/cuda_sdk/C/lib:$$LD_LIBRARY_PATH
make -C /usr/local/cuda_sdk/CInstalling driver on CentOS 6.2
There didn't appear to be a kernel-source package in the CentOS repos. Installed kernel-devel and ran the installer with
sh ./devdriver_4.0_linux_64_270.41.19.run --kernel-source-path /usr/src/kernels/kernel version