Difference between revisions of "Gnodal: Setting up the gnodal switch"
Jump to navigation
Jump to search
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | == Default settings == | ||
| + | |||
| + | 192.168.1.1 / root / admin123 | ||
| + | |||
By default the ports will closed/powered off for security, all ports need to be enabled before you will see any link activity. | By default the ports will closed/powered off for security, all ports need to be enabled before you will see any link activity. | ||
| Line 17: | Line 21: | ||
Eth0/9 not connected Full 10 Gbps No-Negotiation | Eth0/9 not connected Full 10 Gbps No-Negotiation | ||
Eth0/10 not connected Full 10 Gbps No-Negotiation | Eth0/10 not connected Full 10 Gbps No-Negotiation | ||
| + | </syntaxhighlight> | ||
| + | |||
| + | == Turn on all the ports == | ||
| + | And write the changes to ensure systems boots up in the same configuration. | ||
| + | <syntaxhighlight> | ||
| + | GNOS# configure terminal | ||
| + | GNOS(config)# interface range ethernet 0/1-72 | ||
| + | GNOS(config-if-range)# no shutdown | ||
| + | GNOS(config-if-range)# exit | ||
| + | GNOS(config)#GNOS# write startup-config | ||
| + | Building configuration ... | ||
| + | [OK] exit | ||
</syntaxhighlight> | </syntaxhighlight> | ||
Latest revision as of 16:23, 29 January 2015
Default settings
192.168.1.1 / root / admin123
By default the ports will closed/powered off for security, all ports need to be enabled before you will see any link activity.
Check the port status
GNOS# show interface status
Port Status Duplex Speed Negotiation
---- ------ ------ ----- -----------
Eth0/1 not connected Full 10 Gbps No-Negotiation
Eth0/2 not connected Full 10 Gbps No-Negotiation
Eth0/3 not connected Full 10 Gbps No-Negotiation
Eth0/4 not connected Full 10 Gbps No-Negotiation
Eth0/5 not connected Full 10 Gbps No-Negotiation
Eth0/6 not connected Full 10 Gbps No-Negotiation
Eth0/7 not connected Full 10 Gbps No-Negotiation
Eth0/8 not connected Full 10 Gbps No-Negotiation
Eth0/9 not connected Full 10 Gbps No-Negotiation
Eth0/10 not connected Full 10 Gbps No-NegotiationTurn on all the ports
And write the changes to ensure systems boots up in the same configuration.
GNOS# configure terminal
GNOS(config)# interface range ethernet 0/1-72
GNOS(config-if-range)# no shutdown
GNOS(config-if-range)# exit
GNOS(config)#GNOS# write startup-config
Building configuration ...
[OK] exit