Lustre Client on Ubuntu 14.04 LTS (Trusty)

This is a guide to build and install the Lustre client on Ubuntu 14.04 LTS using Mellanox Ethernet only - I have yet to try building it with IB support.

Prework

• Install Mellanox OFED
• Modify Mellanox interface to use Ethernet only "connectx_port_config"

# Mellanox Prerequisites 
root@ubuntu-server-1404-x8664:~# aptitude install  debhelper pkg-config swig quilt flex gfortran tk8.4 tcl tcl8.4 dpatch curl tk python-libxml2 
libgfortran3 bison libnl1 dkms graphviz chrpath

root@ubuntu-server-1404-x8664:~# apt-get update
root@ubuntu-server-1404-x8664:~# aptitude install git build-essential libtool automake python-docutils

Installation Steps

root@ubuntu-server-1404-x8664:~# git clone git://git.whamcloud.com/fs/lustre-release.git
root@ubuntu-server-1404-x8664:~# cd lustre-release
root@ubuntu-server-1404-x8664:~/lustre-release# sh ./autogen.sh
root@ubuntu-server-1404-x8664:~/lustre-release# ./configure --disable-server
root@ubuntu-server-1404-x8664:~/lustre-release# make -j 16
root@ubuntu-server-1404-x8664:~/lustre-release# make -j 16 install

• Modify "/etc/modprobe.d/lustre.conf"

options lnet networks=tcp0(eth2)

• Load Modules
• When issuing "modprobe lustre" ensure the lnet interface in "lustre.conf" is up else you will get errors with "ptlrpc.ko".

root@ubuntu-server-1404-x8664:~# modprobe lnet
root@ubuntu-server-1404-x8664:~# modprobe lustre