Difference between revisions of "Labs: HPC Servers"
Jump to navigation
Jump to search
| Line 55: | Line 55: | ||
|} | |} | ||
| + | == X9 2U Twin<sup>2</sup> == | ||
| + | |||
| + | === Overview === | ||
| + | Server: <code>'''Supermicro 6027TR-H70FRF *'''</code><br/> | ||
| + | CPU Type: <code>'''Sandy Bridge'''</code><br/> | ||
| + | Operating System: <code>'''CentOS 6.2'''</code><br/> | ||
| + | Drive Config: <code>'''Single drive per node'''</code><br/> | ||
| + | |||
| + | '''''* - This is a pre-production server. It contains an 8MB BIOS chip so cannot accept 16MB production BIOS updates. Also, onboard PCH connectivity via hot-plug adapter does not work, hence the use of SAS enabled hot-plug adapters effectively turning the 6027TR-HTFRF into a 6026TR-H70FRF.''''' | ||
== X9 2U Twin<sup>2</sup> == | == X9 2U Twin<sup>2</sup> == | ||
Revision as of 10:14, 4 August 2012
Head Node
This is the head node to our HPC systems. It acts as a gateway to our other HPC hardware as well as providing DHCP, name resolution, network installation and other services for the HPC network.
Overview
Server: Supermicro 6016T-UF
CPU Type: Nehalem/Westmere
Operating System: Rocks 6
Drive Config: Software RAID 5
MAC & IP information
| Interface | MAC Address | IP Address | Network |
|---|---|---|---|
| IPMI | 002590008D08 | TBA | Lab |
| eth0 | 0025900082E0 | TBA | Lab |
| eth1 | 0025900082E1 | TBA | HPC |
Components & Serials
| Component | Serial Number |
|---|---|
| SYS-6016T-UF | S6F16TU1020741 |
| MBD-X8DTU-F | WM01S58721 |
| Xeon Sample 2.67GHz | |
| Xeon Sample 2.67GHz | |
| IMSH2GP02A1F1C-10F P2 (2GB DDR3 Reg ECC) | |
| IMSH2GP02A1F1C-10F P2 (2GB DDR3 Reg ECC) | |
| IMSH2GP02A1F1C-10F P2 (2GB DDR3 Reg ECC) | |
| IMSH2GP02A1F1C-10F P2 (2GB DDR3 Reg ECC) | |
| IMSH2GP02A1F1C-10F P2 (2GB DDR3 Reg ECC) | |
| IMSH2GP02A1F1C-10F P2 (2GB DDR3 Reg ECC) | |
| WD5000ABPS | WCASU6973685 |
| WD5000ABPS | WCASU6976359 |
| WD5000ABPS | WCASU6024553 |
X9 2U Twin2
Overview
Server: Supermicro 6027TR-H70FRF *
CPU Type: Sandy Bridge
Operating System: CentOS 6.2
Drive Config: Single drive per node
* - This is a pre-production server. It contains an 8MB BIOS chip so cannot accept 16MB production BIOS updates. Also, onboard PCH connectivity via hot-plug adapter does not work, hence the use of SAS enabled hot-plug adapters effectively turning the 6027TR-HTFRF into a 6026TR-H70FRF.