All public logs
Jump to navigation
Jump to search
Combined display of all available logs of Define Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 22:28, 2 February 2021 David talk contribs created page Graphcore M2000 System Software Validation (Created page with "== Prerequisites == Before validating which IPU-M2000 system software is running on the IPU-M2000s, follow the steps given in the Graphcore: M2000 Direct Connect Bringup|M20...")
- 22:27, 2 February 2021 David talk contribs created page Graphcore M2000 System Debug (Created page with "= No 100GbE link = During the bringup of our initial IPU M2000 units, it was noticed that the 100GbE interfaces would not give a link. More correctly, they did provide a link...")
- 22:25, 2 February 2021 David talk contribs created page Graphcore M2000 Direct Connect Bringup (Created page with "== Hardware Spec == At the time of writing, the current spec host system is based around: * AS-1024US-TRT (or similar H12 Ultra) * 2 x AMD 7402 CPUs * 16 x 32GB DIMMs * 2 x MC...")
- 22:19, 2 February 2021 David talk contribs created page Graphcore IPU Landing Page (Created page with "== Graphcore M2000 Product == * Graphcore M2000 Direct Connect Bringup * Graphcore M2000 System Debug * Graphcore M2000 System Software Validation * Graphcore Po...")
- 22:00, 2 February 2021 David talk contribs created page OpenStack:Neutron (Created page with "== Jumbo frames MTU in Neutron == First of all, enable jumbo frames (MTU 9000) on your switch and tunnel interfaces on hypervisors. Then enable jumbo frames on Neutron SDN n...")
- 15:19, 20 January 2021 User account Roy talk contribs was created by David talk contribs (work!)
- 17:30, 6 January 2021 David talk contribs created page XCAT Change the hostname of an existing node (Created page with "== Remove the old names from the services == <pre> makedns -d <noderange> makedhcp -d <noderange> makegocons -d <noderange> </pre> == Rename the node == <pre> # node1 being...")
- 15:13, 4 January 2021 User account Jack talk contribs was created by David talk contribs
- 11:44, 29 December 2020 David talk contribs created page XCAT Set up network bonding bond0 (Created page with "<pre> # check the existing networks (region1)[root@stu-dpy1 ~]$ lsdef -t network 192_168_0_0-255_255_255_0 (network) 192_168_1_0-255_255_255_0 (network) # Add a new netwo...")
- 21:51, 27 December 2020 David talk contribs created page XCAT Change the MAC address on an existing node (Created page with "<pre> chdef -t node -o stu-gpu1 mac=04:d4:c4:39:8c:f9 </pre>")
- 10:49, 23 December 2020 David talk contribs created page XCAT Change the hostname of a master node after installation (Created page with "<pre> # bit of house keeping tabprune -a auditlog tabprune -a eventlog # snapshot the xcat DB just in case xcatsnap -d /root/xcatsnap # confirm the db engine in SQLite (if...")
- 10:03, 23 December 2020 David talk contribs created page XCAT Network bonding setup (Created page with "== Cumulus Switch Configuration == <pre> # switch commands apt-get install vim hostnamectl set-hostname switch1 vim /etc/cumulus/.license systemctl restart switchd vim /etc/ne...")
- 09:46, 18 December 2020 David talk contribs created page Kolla show how external network is connected and setup to the physical interfaces (Created page with "<pre> [root@openstack-4 ~]# docker exec -it openvswitch_vswitchd bash (openvswitch-vswitchd)[root@openstack-4 /]# ovs-vsctl show </pre> <pre> Bridge br-ex Contr...")
- 22:13, 16 December 2020 David talk contribs created page XCAT Installation on Centos 8 (Created page with "== Base Level Setup == Note: Starting point Centos minimal 8.2 with networking in place and setup We start by setting the hostname and disabling SElinux <pre> setenforce 0...")
- 16:47, 11 December 2020 David talk contribs created page XCAT Add a new node to an existing cluster (Created page with "== Add the node definition == <pre> mkdef -t node node0002 groups=compute,all \ ip=192.168.102.10 \ mac=00:15:B2:AA:E2:60 \...")
- 12:55, 11 December 2020 David talk contribs created page XCAT Cluster Manager (Created page with "Used as the OS provisioning tool for define cloud * Installation * Setup == Admin Tasks on XCAT == * [[XCAT Setup RAID1 on Compute Nodes]...")
- 12:54, 11 December 2020 David talk contribs created page XCAT Replace failed drive as part of an madam RAID array (Created page with "== Check for failed drives == If any one disk fails in the RAID1 array, do not panic. Follow the procedure listed below to replace the failed disk. Faulty disks should appear...")
- 12:53, 11 December 2020 David talk contribs created page XCAT Setup RAID1 on Compute Nodes (Created page with "== Create the Partition Script area == <pre> # setup RAID1 for the compute nodes mkdir -p /install/custom/partition/ # grab the provided rhel raid1 script wget https://raw....")
- 12:41, 11 December 2020 David talk contribs created page Xcat:xcat replace failed mdadm drive (Created page with "== Check for failed drives == If any one disk fails in the RAID1 array, do not panic. Follow the procedure listed below to replace the failed disk. Faulty disks should appear...")
- 11:53, 11 December 2020 David talk contribs created page Xcat:xcat setup raid1 compute nodes (Created page with "== Create the Partition Script area == <pre> # setup RAID1 for the compute nodes mkdir -p /install/custom/partition/ # grab the provided rhel raid1 script wget https://raw....")
- 22:36, 28 November 2020 David talk contribs created page Setting up Gitlab from scratch on centos 7 (Created page with "== Install prerequisites == <syntaxhighlight lang="bash" line> yum -y install curl policycoreutils openssh-server openssh-clients postfix </syntaxhighlight>")
- 20:42, 27 November 2020 David talk contribs created page Certbot Letsencrypt Setting up standard web servers (Created page with "<pre> yum -y install peel-release yum -y install certbot </pre>")
- 09:12, 30 April 2020 David talk contribs unblocked Vipul talk contribs (he's back!)
- 11:58, 16 July 2019 David talk contribs changed group membership for Benji from (none) to Internal
- 11:56, 16 July 2019 User account Benji talk contribs was created by David talk contribs (why not)
- 11:33, 9 May 2019 David talk contribs changed group membership for Antony from (none) to administrator and Internal
- 11:30, 9 May 2019 User account Antony talk contribs was created by David talk contribs (why not)
- 17:02, 26 July 2018 David talk contribs changed group membership for Raybeaver from (none) to Internal
- 16:57, 26 July 2018 User account Raybeaver talk contribs was created by David talk contribs (new dude)
- 09:36, 4 July 2018 David talk contribs changed group membership for Martin from (none) to Internal
- 18:50, 23 May 2018 User account Thebeaver talk contribs was created by David talk contribs
- 13:41, 8 November 2017 User account Martin talk contribs was created by David talk contribs
- 15:13, 5 December 2014 David talk contribs uploaded File:Output hpl 2xK40.txt
- 15:12, 5 December 2014 David talk contribs uploaded File:Output hpl 2xK20.txt
- 14:41, 24 October 2014 David talk contribs uploaded File:Installguide arch-neutron.png (Openstack 3node arch)
- 15:45, 29 January 2014 David talk contribs uploaded File:Ieel installation add fs.png (Add an FS in IML)
- 14:35, 29 January 2014 David talk contribs uploaded File:Ieel installation add server.png (Add a server with IML )
- 11:57, 1 February 2013 David talk contribs uploaded File:System power systemboard.PNG
- 11:57, 1 February 2013 David talk contribs uploaded File:System power energycard.PNG
- 11:56, 1 February 2013 David talk contribs uploaded File:System power chassis.PNG
- 11:49, 1 February 2013 David talk contribs uploaded File:System power node.PNG
- 17:18, 23 January 2013 David talk contribs changed group membership for Csc-uol from (none) to External
- 17:17, 23 January 2013 User account Csc-uol talk contribs was created by David talk contribs
- 12:18, 23 January 2013 David talk contribs changed group membership for Baik from (none) to External
- 12:17, 23 January 2013 User account Baik talk contribs was created by David talk contribs
- 15:50, 21 January 2013 David talk contribs changed group membership for Codethink from (none) to External
- 15:49, 21 January 2013 User account Codethink talk contribs was created by David talk contribs
- 10:23, 14 November 2012 David talk contribs deleted page SSH: Set up a reverse tunnel (content was: "In this example i want to create an ssh tunnel from a node in bostonlabs to viglen <syntaxhighlight> [viglen@amd-quad]$ ssh -R 2222:localhost:22 david@vhpchead.viglen.co.uk </syntaxhighlight> From the vhpchead node, I can then connect to my desktop node thr...")
- 15:49, 29 October 2012 User account Roshan talk contribs was created by David talk contribs
- 15:44, 3 October 2012 David talk contribs deleted page LAMMPS: Compilation (content was: "== Compilation using openmpi == Unpack the tar file Navigate into src folder Navigate into MAKE folder Edit Makefile.openmpi Remove the flags for FFTW libaray,..." (and the only contributor was "Michael"))
