Caringo:Landing Page
Revision as of 17:13, 29 November 2016 by Matth (talk | contribs) (→Caringo Swarm version 9.0 Install considerations)
Error creating thumbnail: File missing
Caringo Swarm Overview
Caringo Swarm version 9.0 Install considerations
Component Requirement
- Node x86 with Pentium-class CPUs
- Number of nodes Three (to ensure adequate recovery space in the event of node failure)
- Switch Nodes must connect to switches configured for multicasting
- Node boot capability
- USB flash drive or network drive
- Network interfaces One 100 Mbps Ethernet NIC with one RJ-45 port *
- Hard drives One hard drive
- RAM 2 GB
- NTP server To synchronize clocks across nodes
- To be compatible, all nodes in a cluster must use the same speed network interface.
Component Requirement
- Node x86 with Intel Xeon or AMD Athlon64 (or equivalent) CPUs
- Number of nodes Three or more
- Switch Nodes must connect to switches configured for multicasting
- Log server To accept incoming SysLog messages
- Node boot capability
- USB flash drive or network drive
- Network interfaces: Two Dual Gigabit Ethernet NICs with two RJ-45 ports for link aggregation (NIC teaming)
- Hard drives One to four standard non-RAID SATA hard drives
- RAM 4 GB
- NTP server To synchronize clocks across nodes