Bright:CaaS

Make sure, you've followed the Openstack installation guide and you have a working Openstack environment on your Bright cluster. (http://wiki.bostonlabs.co.uk/w/index.php?title=Bright:Openstack-install)

Installing CaaS

[root@shadow-head ~] yum install -y cm-openstack-caas cm-ipxe-caas
[root@shadow-head ~] yum update -y

Next, in the file /cm/shared/apps/cm-openstack-caas/bin/Settings.py, the values of “external_dns_server” and “buildmatic_host_ip” should be edited appropriately:

'external_dns_server': '172.28.0.2'
'buildmatic_host_ip': '172.28.0.199' # this is the external ip of the head node
'pxe_helper_url': 'http://localhost:8082/chain'

After the modifications are in place, the pxehelper service is started and enabled:

[root@shadow-head ~] systemctl start pxehelper
[root@shadow-head ~] systemctl enable pxehelper

The pxehelper service uses port 8082. Unblock this port by adding the following rule to /etc/shorewall/rules and then restarting shorewall:

# -- Allow pxehelper service for automatic head node installation
ACCEPT   net            fw              tcp     8082
 
[root@shadow-head ~] systemctl restart shorewall

The OpenStack images can now be created:

[root@shadow-head ~] openstack image create --file /cm/local/apps/ipxe/ipxe-plain-net0.img --disk-format=raw --container-format=bare --public iPXE-plain-eth0
[root@shadow-head ~] openstack image create --file /cm/local/apps/ipxe/ipxe-plain-net1.img --disk-format=raw --container-format=bare --public iPXE-plain-eth1
[root@shadow-head ~] openstack image create --file /cm/local/apps/ipxe/ipxe-caas.img --disk-format=raw --container-format=bare --public ipxe-caas

The dnsmasq utility must now be configured. Its configuration file: /cm/shared/apps/cm-openstack-caas/etc/dnsmasq.dev.conf has two strings that need to be changed:

# The string is replaced with the external IP address of the head node(s).
<INSERT EXTERNAL IP OF THE MACHINE RUNNING PXE HELPER HERE>
 ...
# This is replaced with the FQDN of the head node (In case of HA setup with the FQDN assigned to the VIP) and with the IP address.
<INSERT EXTERNAL FQDN OF BUILDMATIC SERVER HERE>,<INSERT EXTERNAL IP OF BUILDMATIC SERVER HERE>