Niagra 804: Initial Bootup

Basic boot up via PXE

Get an IP address by DHCP

Request an IP address by typing dhcp:

Octeon cust_n804# dhcp
BOOTP broadcast 1
DHCP client bound to address 172.28.1.84
Octeon cust_n804#

Specify a TFTP server

Specify the TFTP server by setting the serverip environment variable:

Octeon cust_n804# setenv server ip 172.28.0.2

Identify the boot image to pull down

TFTP down the boot image file:

Octeon cust_n804# tftp 0 /images/im_niagra804/vmlinux_n804.bin
Using octmgmt0 device
TFTP from server 172.28.0.2; our IP address is 172.28.1.84
Filename '/images/im_niagra804/vmlinux_n804.bin'.
Load address: 0x20000000
Loading: #################################################
done
Bytes transferred = 33838432 (2045560 hex)

Boot the system

bootoctlinux 0 coremask=f #f = cores 0-3, 3ff = cores 0-9

Setup Networking in BusyBox

Setup the IP networking

  # grab the IP address from the output of dhcp above
  ifconfig mgmt0 172.28.1.84
  route add default gw 172.28.0.1 mgmt0

Setup the resolv.conf file

  # create the following file
  /mnt/sda1 # cat /etc/resolv.conf 
  nameserver 172.28.0.2
  search pxe.boston.co.uk

After this you can use wget to pull files down from the tftp server or the web

Booting Debian

  # rough notes to be padded out
  usb start
  fatload usb 0:1 0x20000000 vmlinux.64
  bootoctlinux 0x20000000 numcores=10 root=/dev/sda2
  mkdir /mnt/sda1
  mkdir /mnt/sda2
  mount /dev/sda1 /mnt/sda1
  mount /dev/sda2 /mnt/sda2
  mount --bind /proc /mnt/sda2/proc
  chroot /mnt/sda2
  ifconfig mgmt0 172.28.1.95 up
  route add default gw 172.28.0.1 mgmt0