Memblaze Cards
Driver Installation
All drivers were provided with teh cards and a copy can be found on storage1 in the hpc folder.
Cd into the driver folder and simply run these two commands:
make
make install
Check cards are detected
in the tools folder run the memmonitor to see the status of the cards:
Memblaze Monitor - Memblaze PCIE Accelerator Monitor
(c) 2014 Memblaze Technology Co., Ltd (All Rights Reserved)
Basic Information
------------------------------------------------------------------------------------------------------------------------------------------------------
Manufacture Name: Memblaze Technology Co.,Ltd
Product Name: PBlaze3
Flash Cell: MLC
Model: PB3LM1.20T01
Form Factor: Half length, half height
Serial Number: MH13240245
Raw Capacity: 1.68TB
Available Capacity: 1.20TB
Maximum Capacity: 1.20TB
Max Write Capacity: 8.38PB
Already Read Capacity: 336.11TB
Already Write Capacity: 262.27TB
Write Amplification: 1.74
Device Information
------------------------------------------------------------------------------------------------------------------------------------------------------
Name: /dev/memdiska
Driver: 01.05.4083RTM (Compiled on Feb 10 2015 11:30:45), 355.01kB
Firmware: 01.05.4073RTM (Compiled on Jul 24 2014 16:01:15), 12.58MB
Initialization Counts: 3
Starup Counts: 34
PCIe Link: x8(Gen2)
Status: Online
Read only: No
Alert Code: 0
Device Remain Life: |>>------------------| (94.57%)
Performance Information
------------------------------------------------------------------------------------------------------------------------------------------------------
<6.96us 6.96us~27.8us 27.8us~111.3us 111.3us~445.2us 445.2us~1.78ms 1.78ms~7.12ms 7.12ms~28.5ms >28.5m