SLS Pismo: Updating firmwares

cxmanage and ipmitool

• The Calxeda/SLS version of ipmitool must be installed for this process to work.
• cxmanage must be installed for this to work.
• For further information, see here.

Check the current running node firmware

• cxmanage -a info <node0_ecme_address>:

[root@pxe boston_arm_scripts]# cxmanage -a info 172.28.101.0
Getting IP addresses...
1 successes  |  0 errors  |  0 nodes left  |  .  

Discovered the following IP addresses:
172.28.101.0
172.28.101.1
. . . 
172.28.101.46
172.28.101.47

Getting info...
48 successes  |  0 errors  |  0 nodes left  |  .   

[ Info from 172.28.101.0 ]
Hardware version    : Foxconn Gaia SoC X01
Firmware version    : ECX-2000-v2.6.7-dirty
ECME version        : v2.6.7-dirty
CDB version         : v2.6.7-dirty
Stage2boot version  : v2.6.7-dirty
Bootlog version     : v2.6.7-dirty
A15boot version     : v2.6.7
Uboot version       : cx_v2.6.7
Ubootenv version    : cx_v2.6.7
DTB version         : v3.8-rc4_cx_2013.06.28-10-g324a0
Node EEPROM version : Unknown
Node EEPROM config  : 0
Slot EEPROM version : Unknown
Slot EEPROM config  : 0
PMIC version        : 193
. . .
[ Info from 172.28.101.47 ]
Hardware version    : Foxconn Gaia SoC X01
Firmware version    : ECX-2000-v2.6.7-dirty
ECME version        : v2.6.7-dirty
CDB version         : v2.6.7-dirty
Stage2boot version  : v2.6.7-dirty
Bootlog version     : v2.6.7-dirty
A15boot version     : v2.6.7
Uboot version       : cx_v2.6.7
Ubootenv version    : cx_v2.6.7
DTB version         : v3.8-rc4_cx_2013.06.28-10-g324a0
Node EEPROM version : Unknown
Node EEPROM config  : 0
Slot EEPROM version : Invalid Image
Slot EEPROM config  : -1
PMIC version        : 193

[root@pxe boston_arm_scripts]#