Caringo:Landing Page
Revision as of 16:53, 29 November 2016 by Matth (talk | contribs) (→Caringo Swarm version 9.0 Minimum Hardware requirements)
Error creating thumbnail: File missing
Caringo Swarm Overview
Caringo Swarm version 9.0 Minimum Hardware requirements
- Component Requirement
- Node x86 with Pentium-class CPUs
- Number of nodes Three (to ensure adequate recovery space in the event of node failure)
- Switch Nodes must connect to switches configured for multicasting
- Node boot capability
- USB flash drive or network drive
- Network interfaces One 100 Mbps Ethernet NIC with one RJ-45 port *
- Hard drives One hard drive
- RAM 2 GB
- NTP server To synchronize clocks across nodes
- To be compatible, all nodes in a cluster must use the same speed network interface.
Caringo Swarm version 9.0 Recommended Hardware requirements
Component Requirement Node x86 with Intel Xeon or AMD Athlon64 (or equivalent) CPUs Number of nodes Three or more Switch Nodes must connect to switches configured for multicasting Log server To accept incoming SysLog messages Node boot capability USB flash drive or network drive Network interfaces Two Dual Gigabit Ethernet NICs with two RJ-45 ports for link aggregation (NIC teaming) Hard drives One to four standard non-RAID SATA hard drives RAM 4 GB NTP server To synchronize clocks across nodes