Gnodal: Setting up the gnodal switch

From Define Wiki
Revision as of 14:34, 4 February 2013 by David (talk | contribs)
Jump to navigation Jump to search

By default the ports will closed/powered off for security, all ports need to be enabled before you will see any link activity.

Check the port status

GNOS# show interface status

Port        Status           Duplex   Speed       Negotiation   
----        ------           ------   -----       -----------   
Eth0/1      not connected    Full     10 Gbps     No-Negotiation
Eth0/2      not connected    Full     10 Gbps     No-Negotiation
Eth0/3      not connected    Full     10 Gbps     No-Negotiation
Eth0/4      not connected    Full     10 Gbps     No-Negotiation
Eth0/5      not connected    Full     10 Gbps     No-Negotiation
Eth0/6      not connected    Full     10 Gbps     No-Negotiation
Eth0/7      not connected    Full     10 Gbps     No-Negotiation
Eth0/8      not connected    Full     10 Gbps     No-Negotiation
Eth0/9      not connected    Full     10 Gbps     No-Negotiation
Eth0/10     not connected    Full     10 Gbps     No-Negotiation
Retrieved from "http://wiki.define-technology.com/mediawiki-1.35.0/index.php?title=Gnodal:_Setting_up_the_gnodal_switch&oldid=1883"