Hedvig : High Availability Proxies configurations

Proxies set in HA

• Hedvig recommends to set the proxies in High Availability configuration.
• Setting up HA over proxies in Virtual environment will require another cvm.ova to be deployed in ESXI.
• This second machine should have be on same network as of other proxy.
• While creation of the hedvig cluster edit tgt nodes file as follows.
• Specify storage proxy entries in one of the formats in the sample configuration,depending on whether you are doing auto or manual routing.
• Storage proxies require a VIP on the public network

# Enter list of iscsi/nfs nodes below    
# ----    
# sample config(standalone): host1    
#                            host2    
#    
# sample config(HA): host1,host2,vip=192.168.108.30,privatenet=172.22.22.0    
#                    host3,host4,vip=192.168.108.31,privatenet=172.22.22.0    
#    
# sample config(HA): host1,host2,vipname=host-vip,privatenet=172.22.22.0    
#                    host3,host4,vipname=host2-vip,privatenet=172.22.22.0    
#    
# supported attributes - for HA:    
#   vip        = virtual ip to be used with HA    
#   vipname    = virtual hostname to be used with HA    
#   privatenet = private network to be used with HA    
#   ssh_port   = port for mgmt to communicate with targets    
#   ----    
# primary,secondary,vip=<vip>,privatenet=<privatenet>    
# ----    

proxy1,proxy2,vip=172.22.28.243,privatenet=172.22.22.0