RHSS: On-Premise system reqs
Jump to navigation
Jump to search
Network Requirements
Most deployments will work well enough with 1 Gigabit Ethernet as the throughout will scale as the number of servers increases.
As of RHSS 2.0 1 Gigabit Ethernet and 10Gigabit Ethernet are supported. Infiniband is in testing and it is recommended that 10 Gbe is used.
Storage Servers
The requirements for RHSS go beyond those of a basic GlusterFS system. The specs below are not the only working config, but this is a basic configuration comparison.
| GlusterFS 3.3 | RHSS 2.0 | |
|---|---|---|
| Architecture | Intel/AMD x86 64-bit processor | Intel/AMD x86 64-bit processor |
| Memory | 1GB Minimum | 16GB |
| System Disk | 1 Disk | 12 Disks RAID6 |
| Netowork | Gigabit or 10Gbe Ethernet Infiniband (OFED 1.5 or later) | Gigabit or 10Gbe Ethernet |
| OS | Red Hat Enterprise Linux 6.2+ | Red Hat Enterprise Linux 6.2 EUS |
| Installation | ISO,DVD | Satellite Server, ISO or DVD |
| Sub-System FS | XFS | Red Hat Scalable File System (XFS) |
Data Container
The List of supported hardware can be found online:
https://access.redhat.com/site/articles/66206#HP_High_Performance_Configuration
The system must be set up with two Volumes:
- At least 2 disks totalling no less than 200GB, RAID 1: For the OS
- At least 12 Disks, RAID6, XFS / LVMs: For the Data